4-Port ADSL Router User Manual

Configuring Your Computers
15
Windows NT 4.0
First, check for the IP protocol and, if necessary, install it.
1.
In the Windows NT task bar, click the [Start] button,
point to [Settings], then click [Control Panel].
2.
In the [Control Panel] window, double-click the [Network] icon.
3.
In the [Network] dialog box, click the [Protocols] tab. The
[Protocols] tab displays a list of currently installed network
protocols. If the list includes [TCP/IP], then the protocol
has already been enabled. Skip to Step 9.
4.
If [TCP/IP] does not display as an installed component,
click [Add...].
5.
In the [Select Network Protocol] dialog box, select [TCP/IP],
and then click [OK].
You may be prompted to install files from
your Windows NT 4.0
installation CD or other media. Follow
the instructions to install
the files. After all files are installed,
a window appears to inform you that a TCP/IP service called
DHCP can be set up to dynamically assign IP information.
6.
Click [Yes] to continue, and then click [OK] if prompted to restart
your computer. Next, configure the PCs to accept IP information
assigned by the ADSL Barricade.
7.
Open the [Control Panel] window, and then double-click
the [Network] icon.
8.
In the [Network] dialog box, click the [Protocols] tab.
9.
In the [Protocols] tab, select [TCP/IP], then click [Properties].
10.
In the [Microsoft TCP/IP Properties] dialog box, click the radio
button labeled [Obtain an IP address from a DHCP server].
11.
Click [OK] twice to confirm and save your changes, and then
close the [Control Panel].