4-Port ADSL Router User Manual

Configuring Dynamic Host Configuration Protocol
54
4.
Select your WAN interface from the drop-down list and
click [Add]. Your WAN interface may be named [ppp-0],
[eoa-0], or [ipoa-0]. Contact your ISP if you are unsure
which type of WAN interface you use.
Note:
You can also delete an interface from
the table by clicking in the right column.
5.
Click [Submit]. A page appears to confirm your changes, and
then the program returns to the [Dynamic Host Configuration
Protocol (DHCP) Relay Configuration] page.
6.
Follow the instructions in Setting the DHCP Mode
to set the DHCP mode to DHCP Relay.
Setting the DHCP Mode
You must enable the appropriate DHCP mode to activate
your DHCP relay or DHCP server settings.
Follow these instructions to set the DHCP mode:
1.
Click the [LAN] tab, and then click [DHCP Mode] in the
task bar. The [Dynamic Host Configuration Protocol (DHCP)
Configuration] page appears.
Figure 15. Dynamic Host Configuration Protocol (DHCP)
Configuration Page