4-Port ADSL Router User Manual

Configuring DNS Server Addresses
84
a. Click the [Services] tab, and then click [DNS]
in the task bar. The [Domain Name Service
(DNS) Configuration] page appears.
Figure 28. Domain Name Service (DNS) Configuration Page
b. Type the IP address of the DNS server in an empty
row and click [Add]. You can enter only two addresses.
c. Click the [Enable] radio button, and then click [Submit].
3.
Click the [Admin] tab, and then click [Commit & Reboot] in
the task bar.
4.
Click [Commit] to save your changes to the permanent
memory.
Note:
DNS addresses that are assigned to LAN PCs prior to
enabling DNS relay will remain in effect until the PC is
rebooted. DNS relay will only take effect when a PC's
DNS address is the LAN IP address. Similarly, if after
enabling DNS relay, you specify a DNS address (other
than the LAN IP address) in a DHCP pool or statically
on a PC, then that address will be used instead of the
DNS relay address.