4-Port ADSL Router User Manual

Configuring IP Routes

Adding IP Routes

Follow these instructions to add an IP route to the routing table.

From the [IP Route Table] page, click [Add]. The [IP Route -

Add] page appears, as shown in Figure 30.

Figure 30. IP Route-Add Page

Specify the Destination, Netmask, and Gateway or NextHop

for this route. For a description of these fields, refer to the

table on page 89. To create a route that defines the default

gateway for your LAN, enter 0.0.0.0 in both the [Destination:]

and [Netmask:] fields. Enter your ISP's IP address in the

[Gateway/NextHop:] field.

Note:

You cannot specify the interface name, route type

or route origin. These parameters are used only

for routes that are identified automatically as the

device communicates with other routing devices.

For routes you created, the routing table displays

system default values in these fields.