User's Manual
Table Of Contents
- retail_ wired 7904BRA3
- SMC7904BRA3 UserManual_Update_20090414
- 1 Introduction
- 2 Hardware Installation
- 3 Introducing the Web Configurator
- Appendix A
- Questions & Answers
- Appendix B
- Appendix C
- GPL Anouncement
SMC7904BRA3 User Manual
Fig 3.6.3.2
Select the checkbox Enable DMZ to enable this function. Then input a IP Address of the DMZ host.
Click the button Apply Changes to save the settings of this page.
3.6.4 Routing
Click Routing in the sub-menu to open the menu in the left bar, which contains two items: RIP and Static
Route.
3.6.4.1. RIP
Click RIP in the left bar to open the screen of Fig 3.6.4.1. Enable the RIP if you are using this device as a
RIP-enabled router to communicate with others using the Routing Information Protocol. This page is used
to select the interfaces on your devices that use RIP, and the version of the protocol used.
33