User's Manual

2
DOCSIS 3.0 Wireless Gateway Installation Instructions
Copyright ©2013 SMC Networks. All rights reserved
All information contained in this documentation is subject to change without notice.
Models
The SMC Wireless Gateway comes in one version: D3G2408WE.
Package Contents
1 – Wireless Data Gateway
1 – Power Supply and AC Power Cord
1 – CAT-5 Ethernet cable
1 – These Installation Instructions
Installation Overview
1. Connect the coaxial cable from the cable outlet to the Gateway.
2. Connect your wired connections (Ethernet and USB) to the rear panel as shown in the diagram below.
3. Connect the power supply to the Gateway and to a wall power outlet.
WARNING: Use only the provided power supply! Using a different power supply may damage your unit
and void the warranty.
AVERTISSEMENT: Utilisez uniquement la source d’alimentation fournie! L’utilisation d’une autre source
d’alimentation risque d’endommager l’unité et d’annuler la garantie.
4. Conrm the front panel POWER LED is ON.
5. Wait until the DS, US and ONLINE LED stop ashing and the ONLINE LED stays ON indicating that the
device is online. If the ONLINE LED does not go ON in 5 minutes, contact your Internet Service Provider.
6. If your computer or wireless client device supports WPS (Wi-Fi Protected Setup), press the WPS button
on the front panel for 5 seconds to enable WPS.
7. Press the WPS button on your computer or wireless client within 60 seconds to complete association
process. When a client joins the network, the WPS LED stays ON until the next WPS action or the device
reboots. If no client joins, the LED stops blinking after 4 minutes.
NOTE: You must set up your computer and other wireless client devices to work with security settings on
this device. Refer to the documentation for your wireless client devices for instructions on setting security.
8. (Optional): Log in to congure additional device settings.
Open a Web browser page and type http://192.168.0.1 in the address bar.
At the Login screen, enter the following login information:
(NOTE: Username and password are case sensitive.)
Username: admin
Password: password
Detailed user manual can be downloaded from http://na.smc.com.