- SMC Wireless Router User Guide

Barricade g Wireless Router with USB Print Server Manual

4.4 | Configuring a Macintosh Computer

You may find that the instructions here do not exactly match your screen. This is because these

steps and screenshots were created using Mac OS 8.5. Mac OS 7.x and above are all very similar,

but may not be identical to Mac OS 8.5.

1. Pull down the Apple Menu. Click [Control Panel] and select TCP/IP.

2. In the TCP/IP dialog box, make sure that [Ethernet] is selected in the [Connect Via:] field.

If [Using DHCP Server] is already selected in the [Configure] field, your computer is already

configured for DHCP. Close the TCP/IP dialog box, and skip to Step 2 Disable HTTP Proxy

(bottom of this page).

3. All the information that you need to record is on the [TCP/IP] dialog box. Use the space

below to record the information.

4. Select [Using DHCP Server] in the [Configure] field and close the window.

5. Another box will appear asking whether you want to save your TCP/IP settings. Click

[Save].