- SMC Wireless Router User Guide

Barricade g Wireless Router with USB Print Server Manual

A.3 | I have another IP Address displayed

If you have another IP address listed, then the PC may not be configured for a DHCP connection.

Please refer to Chapter 4 | Configure your Computer for information.

Once you have confirmed your computer is configured for DHCP, and then please follow the steps

below.

1. Open a DOS window as described above.

2. Type “ipconfig /release” (without the quotes)

3. Then type “ipconfig /renew” (without the quotes)

Once you are able to get a valid IP address from the Barricade Router, then you can now access

the web-based Administration pages.

If you still are not getting an IP address from the Barricade, please reset the router as outlined

in Chapter 2 and follow the steps outlined in this appendix again.

If you still cannot access the router once you have reset it, please contact SMC Technical

Support.