User's Manual

錯誤! 尚未定義樣式。
101
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Adding Predefined Services
Using the following procedure, you can select well-known services and specify the LAN host
IP address(es) that will provide the service to the Internet.
1. In the Port Forwarding menu, be sure Disable Port Forwarding Function is not checked
(unchecked is the default setting).
2. Click the Add button below the Predefined Service Table. The Predefined Service menu
appears (see Figure 52).
3. Complete the fields in the Predefined Service menu (see Table 24).
4. Click Apply. (Or click Back to return to the Port Forwarding menu or Cancel to cancel any
selections you made.) If you clicked Apply, the predefined service is added to the
Predefined Service Table.
5. To configure additional predefined services (up to 100, including customer-defined
services), repeat steps 1 through 3.
6. To change the settings for a predefined service, click the radio button to the left of the
service you want to change and click the Edit button. When the Predefined Service menu
appears, edit the settings as necessary (see Table 24) and click Apply.
7. To delete a predefined service, click the radio button to the left of the service you want to
delete and click the Delete button. No precautionary message appears before you delete a
predefined service.