User's Manual

錯誤! 尚未定義樣式。
111
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Configuring Access Control
The Access Control menu lets you enable access control to block traffic at the Gateway's
LAN interfaces from accessing the Internet.
To access the Access Control menu, click Firewall in the menu bar and then click the
Access Control submenu in the menu bar.
Note: The Access Control submenu is not available in the menu bar if Enable
Firewall Module is disabled in the Security Settings (Firewall) menu (see page
105).
By default, the Gateway does not block attempts to access the LAN from the Internet. To
enable access control, check Enable Access Control if it is unchecked and click Apply.
When Access Control is enabled, you can configure up to 35 predefined and customer-
defined filtering tables.
Figure 57. Access Control Menu