User's Manual

錯誤! 尚未定義樣式。
142
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Restoring Factory Defaults
One way to restore the Gateway’s factory default settings is by using the Reset switch on
the Gateway’s rear panel (see “Restoring Factory Defaults” on page 15). Another way is to
use the Configuration Tools menu to power-cycle the Gateway.
Note: Rebooting the Gateway removes any customized overrides you made to the
default settings. To reboot the Gateway and retain any customized settings, use
the Reboot menu (see “Using the Reboot Menu to Reboot the Gateway“ on page
137).
1. Under Restore to Factory Defaults, click Factory Reset. The warning message in Figure
73 appears.
2. Click OK to restore the Gateway’s factory default settings or click Cancel to retain the
Gateway’s current settings.
Figure 73. Warning Message when Restoring Factory Defaults