User's Manual

錯誤! 尚未定義樣式。
41
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Table 5. Password Settings Menu Options
Option Description
Current Password Enter the current case-sensitive administrator password. For security purposes, every typed
character appears as a dot (y). The default password is not shown for security purposes.
MSO Username Enter the current new case-sensitive administrator username.
New Password Enter the new case-sensitive administrator password you want to use. A password can
contain up to 32 alphanumeric characters. Spaces count as password characters. For security
purposes, every typed character appears as a dot (y).
Re-Enter Password for Verification Enter the same case-sensitive administrator password you typed in the New Password field.
For security purposes, every typed character appears as a dot (y).
Commercial New Password Enter the new case-sensitive password your commercial users will use to log in to the
Gateway Web management interface. A password can contain up to 32 alphanumeric
characters. Spaces count as password characters. For security purposes, every typed
character appears as a dot (y). If you leave this field blank, the default user password will be
password.
Re-Enter Commercial New
Password for Verification
Enter the same case-sensitive user password you typed in the Commercial New Password
field. For security purposes, every typed character appears as a dot (y).
Customer New Password Enter the new case-sensitive password your customers will use to log in to the Gateway Web
management interface. A password can contain up to 32 alphanumeric characters. Spaces
count as password characters. For security purposes, every typed character appears as a dot
(y). If you leave this field blank, the default user password will be password.
Re-Enter Customer New Password
for Verification
Enter the same case-sensitive user password you typed in the Customer New Password
field. For security purposes, every typed character appears as a dot (y).
Idle Time Out Your Web management interface sessions timeout after 10 minutes of idle time. To change
this duration, enter a new timeout value.
RADIUS Authentication To enable RADIUS authentication, check this box and then select the options for the primary
and secondary authentication servers.
Timeout Amount of time the Gateway waits for a response from the RADIUS servers before it tries to
connect to the RADIUS servers again. Default is 3 seconds.
Retry Maximum number of connection attempts the Gateway makes to connect to the RADIUS
servers before giving up. Default is 3.
Primary/Secondary For the primary and secondary authentication servers, enter the:
• IP address of the RADIUS servers.
• Port number that RADIUS uses for authentication. Default is 1812.
• Authentication algorithm used for authentication. Choices are CHAP, MS-CHAP, and MS-
CHAPv2. Default is CHAP.
• Secret shared between the Gateway and RADIUS servers. For security purposes, every
typed character appears as a dot (y).