User's Manual

錯誤! 尚未定義樣式。
43
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Remote Management Menu
Administrative users can use the Gateway’s Web-based management or Telnet to manage
the device remotely using the public Internet.
y To use Web-based management, users specify the WAN IP address and remote
management port in the URL entered in the Browser’s address field
y For Telnet, users specify the WAN IP address and the remote Telnet management port
Using the Remote Management menu, you can enable HTTP, Telnet, HTTPS, and SSH and
specify the port numbers for each of these settings. You can also limit remote management
to specific IP addresses.
To access the Remote Management menu, click System in the menu bar and then click the
Remote Management submenu in the menu bar. Figure 20 shows an example of the menu
and Table 6 describes the settings you can select.
Figure 20. Remote Management Menu