User's Manual

錯誤! 尚未定義樣式。
46
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Figure 21. Customer UI Setup Menu
WAN Settings Menu
The Gateway can connect to the cable service provider using either a static IP address or an
IP address automatically assigned by a Dynamic Host Configuration protocol (DHCP) server.
Using the WAN Settings menu, you can assign your own static WAN IP and DNS addresses
to the Gateway. By default, both options are disabled, allowing the Gateway to obtain these
settings automatically from a DHCP server.
To access the WAN Settings menu, click WAN in the menu bar. Figure 22 shows an
example of the menu and Table 7 describes the settings you can select.