User's Manual

錯誤! 尚未定義樣式。
59
SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual
Adding Public Subnets
Using the following procedure, you can add up to 5 public subnets to the LAN interface.
1. In the Additional Pubic LAN menu, click the Add button The Adding Public Lan menu in
Figure 28 appears.
Figure 28. Adding Public Lan Menu
2. In the IP Address row, enter the IP address for the new public subnet.
3. In the Subnet Mask row, add the subnet mask for the new public subnet.
4. Click Apply to add the IP address and subnet. (Or click Back to return to the previous
menu or Cancel to cancel the operation .) If you clicked Apply, the IP address and subnet
mask are added to the Additional Public Lan Table.
5. By default the IP address and subnet you specified are active. To make then inactive,
uncheck the check box below Active.
6. Click Apply in the Additional Public Lan menu to save your settings.
7. To add more public subnets (up to 5), repeat steps 1 through 6.