User's Manual

錯誤! 尚未定義樣式。

SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual

Table 21. WPS Summary and WPS Progress Options

Option Description

WPS Config Enables or disables the Gateway’s WPS setup.

• ENABLE = Gateway’s WPS setup is available. (default)

• DISABLE = Gateway’s WPS setup is unavailable.

WPS Summary

WPS Current Status A read-only field that shows whether WPS is currently being used.

WPS Configured A read-only field that whether WPS has been configured.

AP PIN A read-only field that shows the personal identification number (PIN) for the access point.

WPS Progress

WPS mode Determines whether WPS can be configured using a PIN or the WPS button on the front panel of the

Gateway.

• PIN = requires users to enter a PIN in the WPS Setup menu to configure WPS.

• PBC = Push Button Configuration. Allows users to use the WPS button on the front panel of the

Gateway to configure WPS.

WPS PIN If PIN was selected for WPS mode, enter the PIN that users must enter to enable WPS. The PIN

must be 8 alpha-numeric characters long.