User Guide

SNMP Commands

7-43

Command Mode

Global Configuration

Command Usage

• This command enables both authentication failure notifications and

link-up-down notifications.

•The snmp-server host command specifies the host device that will receive

SNMP notifications.

Example

Related Commands

snmp-server host (7-44)

snmp-server host

This command specifies the recipient of an SNMP notification. Use the no form to

remove the specified host.

Syntax

snmp-server host <1 | 2 | 3 | 4> <host_ip_address | host_name>

<community-string>

no snmp-server host

• 1 - First SNMP host.

• 2 - Second SNMP host.

• 3 - Third SNMP host.

• 4 - Fourth SNMP host.

• host_ip_address - IP of the host (the targeted recipient).

• host_name - Name of the host. (Range: 1-63 characters)

• community-string - Password-like community string sent with the

notification operation. Although you can set this string using the

snmp-server host command by itself, we recommend that you define this

string using the snmp-server community command prior to using the

snmp-server host command. (Maximum length: 23 characters)

Default Setting

Host Address: None

Community String: public

Command Mode

Global Configuration

Enterprise AP(config)#snmp-server enable server

Enterprise AP(config)#