User Guide

Rogue AP Detection Commands
7-109
7
show station
This command shows the wireless clients associated with the access point.
Command Mode
Exec
Example
Rogue AP Detection Commands
A “rogue AP” is either an access point that is not authorized to participate in the
wireless network, or an access point that does not have the correct security
configuration. Rogue APs can potentially allow unauthorized users access to the
network. Alternatively, client stations may mistakenly associate to a rogue AP and
be prevented from accessing network resources. Rogue APs may also cause radio
interference and degrade the wireless LAN performance.
The access point can be configured to periodically scan all radio channels and find
other access points within range. A database of nearby access points is maintained
where any rogue APs can be identified.
Enterprise AP#show station
Station Table Information
========================================================
if-wireless G VAP [1] :
802.11g Channel : 1
No 802.11g Channel Stations.
.
.
.
Enterprise AP#
Table 7-18. Rogue AP Detection Commands
Command Function Mode Page
rogue-ap enable Enables the periodic detection of other nearby access
points
GC 7-111
rogue-ap authenticate Enables identification of all access points GC 7-112
rogue-ap duration Sets the duration that all channels are scanned GC 7-112
rogue-ap interval Sets the time between each scan GC 7-113
rogue-ap scan Forces an immediate scan of all radio channels GC 7-113
show rogue-ap Shows the current database of detected access points Exec 7-114