User Guide

Cables and Pinouts

B-4

Wiring Map for Serial Cable

Table B-2. Wiring Map for Serial Cable

DB9 Male (AP Console) DB9 Male (PC DTE)

Pin Function Pin Function

1 GND (ground) 5 GND (ground)

2 Unused

4Unused

3 RXD (receive data) 3 TXD (transmit data)

4 TXD (transmit data) 2 RXD (receive data)

5 Unused 1 Unused

6 Unused 9 Unused

7 RTS (request to send) 8 CTS (clear to send)

8 CTS (clear or send) 7 RTS (request to send)

9 Unused 6 Unused

Note: The left hand column pin assignments are for the male DB-9 connector on the access point. Pin 4

(TXD or “transmit data”) must emerge on the management console’s end of the connection as RXD

(“receive data”). Pin 8 (CTS or “clear to send”) must emerge on the management console’s end of

the connection as RTS (“request to send”)