User Guide

6-1
Chapter 6: System Configuration
Before continuing with advanced configuration, first complete the initial configuration
steps described in Chapter 4 to set up an IP address for the access point.
The access point can be managed by any computer using a web browser (Internet
Explorer 5.0 or above, or Netscape Navigator 6.2 or above). Enter the configured IP
address of the access point, or use the default address: http://192.168.2.2
To log into the access point, enter the default user name “admin” and the password
“smcadmin”, then press “LOGIN”. When the home page displays, click on Advanced
Setup. The following page will display.
The information in this chapter is organized to reflect the structure of the web
screens for easy reference. However, it is recommended that you configure a user
name and password as the first step under advanced configuration to control
management access to this device (page 6-28).