User Guide

Advanced Configuration

6-31

CLI Commands for Downloading Software from a TFTP Server – Use the copy tftp

file command from the Exec mode and then specify the file type, name, and IP

address of the TFTP server. When the download is complete, the dir command can

be used to check that the new file is present in the access point file system. To run

the new software, use the reset board command to reboot the access point.

Enterprise AP#copy tftp file 7-56

1. Application image

2. Config file

3. Boot block image

Select the type of download<1,2,3>: [1]:1

TFTP Source file name:img.bin

TFTP Server IP:192.168.2.29

Enterprise AP#dir 7-58

File Name Type File Size

-------------------------- ---- -----------

dflt-img.bin 2 1319939

img.bin 2 1629577

syscfg 5 17776

syscfg_bak 5 17776

262144 byte(s) available

Enterprise AP#reset board 7-10

Reboot system now? <y/n>: y