User's Manual

Managing the Physical Devices in Your Security System
Page 86 | August 17, 2010
A Stop button is displayed on the Locating Wireless Sensors screen. The TouchScreen searches for sensors that are
available to be added. As sensors are found, a grayed icon is displayed for that sensor.
4. Fault each found sensor to pair it to the TouchScreen.
For example, for Door/Window sensors, separate the magnet and reed switch to mimic a door
being opened.
As sensors are found, a grayed icon is displayed for that sensor.
The icon for each sensor is undarkened as it is faulted and the TouchScreen beeps. The sensor is paired to the
TouchScreen.
5. Determine that all the sensors have been located by the TouchScreen.
6. When all the sensors are found and paired, touch Stop.
The system notes the number of wireless sensors found and paired.