User's Manual

Technician Operations
Page 73 | August 17, 2010
Configuring the Swinger Shutdown Feature
The Swinger Shutdown feature helps prevent a runaway TouchScreen from tying up the central station.
After the TouchScreen has sent an alarm the set number of times (trips) to central monitoring, no more
alarms will be sent to central monitoring for 48 hours or until the security system is disarmed.
To configure the swinger shutdown:
1. From the Installer Settings Menu, touch Security ® Swinger Shutdown.
The Swinger Shutdown Settings screen is displayed.
2. Touch the right and left-pointing arrows to increase and decrease the number of swinger shutdown
trips (Maximum Trips).
Note: The number of trips cannot be less than 1 or exceed 6.
3. Touch Swinger Shutdown Enabled to disable this feature.
Touch Swinger Shutdown Disabled to enable this feature.