User's Manual

Managing the Physical Devices in Your Security System
Page 93 | August 17, 2010
The Add Cross-Zone Associations screen is displayed.
3. Touch a sensor/security zone listed in the First Zone column.
4. Touch a different sensor/security listed in the Second Zone column.
5. In the Cross Zone Timeout field, touch the arrows to set the number of seconds that the system
will wait after ONE of the sensors is faulted to see if the OTHER sensor is faulted.
6. Touch Save to create the cross-zone association.
To delete a cross-zone association for two sensors:
1. From the Installer Settings Menu, touch Sensors & Zones ® Cross Zone Association.