User's Manual

Page 135 | August 17, 2010
Appendix B: TouchScreen Placement Options
The TouchScreen can be positioned on a flat surface or mounted to the wall (see page 136). Wherever the
TouchScreen is placed, ensure that it is in a location where its sirens and other audible signals can be
clearly heard by the occupants. Additionally, the TouchScreen should be located where someone entering
the premises can easily access it to disarm it.
Positioning the TouchScreen on a Flat Surface
The TouchScreen can be positioned on a flat surface.
Recommendations:
§ Position the TouchScreen on a flat surface that is not subject to vibrations or wobbles.
§ Ensure the flat surface is not subject to traffic that could topple it or bump the TouchScreen.
§ Position the TouchScreen near an unswitched wall outlet (not controlled by a light switch).
§ Do NOT position the TouchScreen near a cordless phone stand or microwave as these devices
could interfere with the communication with the sensors.
To install the TouchScreen to be positioned on a flat surface, use the instructions on page 4.