User's Manual

Appendix B: TouchScreen Placement Options
Page 137 | August 17, 2010
To mount the TouchScreen to the wall:
1. Insert the A/C adapter into the bracket.
See Table 1 on page 6
for electrical ratings
for the A/C power supply.
2. Remove the center screw from the wall outlet.
3. Plug the TouchScreen’s A/C adapter into the
TOP plug of the wall outlet, and replace the
center screw through the bracket hole.
4. As shown in Figure 50:
a. Cut a hole in the wall near an unswitched wall outlet (not controlled
by a light switch).
b. Drill a hole under the cut-out and work the A/C cable into the hole
and out of the cut-out/
Figure 50