User's Manual

Appendix E: Using the Key Fob
Page 148 | August 17, 2010
Arming the System
From the key pad, you can arm your system in Arm Away mode or Arm Stay. Arm Night mode must
be performed from the TouchScreen or Subscriber Portal.
Arm Away Mode
Press the button for 1.5 seconds to arm the system in Arm Away mode (no one still in the
premises). See the TouchScreen User Guide for an explanation of this arming mode.
The LED flashes red once to indicate that it has contacted the system then lights red for one second. The Exit Delay
starts (default 30 seconds—TouchScreen beeps during this period).
Arm Stay
Press the button for 1.5 seconds to arm the system in Arm Stay mode (there are still people
within the premises).See the TouchScreen User Guide for an explanation of this arming mode.
The LED flashes red once to indicate that it has contacted the system then lights red for one second. The Exit Delay
starts—twice as long as the period configured for Arm Away (up to 120 seconds with no beeping from the
TouchScreen).
Disarming the System
Before entering the premises in Armed state, press the button for 1.5 seconds to disarm the
system without entering the premises.
The LED flashes green once to indicate that it has contacted the system then lights green for one second indicating that
the system is disarmed.