- SMC Actuators Operating Manual
27
8. Wiring Cable
• In an application where the cable cannot be anchored, try to place the cable so that it sags only under
its own weight or use self-standing type cable as large radial wire duct to limit the load on the cable.
• Never cut and/or reconnect the cables supplied with the product for the purpose of extending or
shortening the cable length.
• The cables supplied with the actuator offer excellent flexibility, but they are not robot cables. If the
cables are to be stored in a movable cable duct (cable bearer, etc.), use robot cables.
For cable modification, please contact your IAI sales representative.