Manual

Select an operational mode and click Save at the bottom of this page,and then you are brought

back to the start page.

2.4.3. Step 2: Configuring TCP/IP Settings

Fig. 8.TCP/IP settings.

Go to the TCP/IP Addressing section to configure IP address settings.The IP address can be manu-

ally set or automatically assigned by a DHCP server on the LAN.If you are manually setting the IP

address, Subnet mask, and Default gateway settings,set them appropriately, so that they com-

ply with your LAN environment.In addition,you can specify the Host name and Domain (DNS

suffix) of the SMC2582W-B.

When you are finished,click Save at the bottom of this page,and then you are brought back to the

start page.

2.4.4. Step 3: Configuring IEEE 802.11 Settings

Fig. 9.IEEE 802.11b communication settings.

Go to the IEEE 802.11, Communication section to configure IEEE 802.11b-related communication

settings,including Channel number and Network name (SSID).

The number of available RF channels depends on local regulations.

NOTE: The Regulatory domain setting of the SMC2582W-B sold in the U.S.and Canada is

not configurable.It is set to FCC by default.As a result,only channels from 1 to 11 are available.

NOTE: For two SMC2582W-Bs or one wireless client computer and one SMC2582W-B to establish

a wireless link,both devices must be configured with the same channel number and SSID.