Manual

• System Log. System events log.

• General. Global operations.

• Operational Mode.Operational mode settings.

• Password. For gaining rights to change the settings of the SMC2582W-B.

• Firmware Tools. For upgrading the firmware of the SMC2582W-B,backing up and restoring

configuration,and configuration reset settings of the SMC2582W-B.

• TCP/IP. TCP/IP- related settings.

• Addressing. IP address settings for the SMC2582W-B to work with TCP/IP.

• DHCP Server. Settings for the DHCP (Dynamic Host Configuration Protocol) server on the

SMC2582W-B.

• IEEE 802.11. IEEE 802.11b-related settings.

• Communication. Basic settings for the IEEE 802.11b interface of the SMC2582W-B to work

properly with wireless clients.

• Security. Security settings for authenticating wireless users and encrypting wireless data.

• Advanced.Advanced settings of the SMC2582W-B.

• Packet Filters. Ethernet Type Filters,IP Protocol Filters,and TCP/UDP Port Filters settings.

• Management. UPnP,System Log,and SNMP settings.

3.1.2. Save, Save & Restart, and Cancel Commands

Fig. 16.Save,Save & Restart,and Cancel.

At the bottom of each page that contains settings you can configure,there are up to three but-

tons—Save,Save & Restart, and Cancel. Clicking Save stores the settings changes to the mem-

ory of the SMC2582W-B and brings you back to the start page.Clicking Save & Restart stores the

settings changes to the memory of the SMC2582W-B and restarts the SMC2582W-B immediately

for the settings to take effect.Clicking Cancel discards any settings changes and brings you back to

the start page.