Manual

3.4.2. DHCP Server
3.4.2.1. Basic
Fig. 34.Basic DHCP server settings.
The SMC2582W-B can automatically assign IP addresses to client computers by DHCP.In this section
of the management page,you can specify the Default gateway, Subnet mask, Primary DNS
server, and Secondary DNS server settings that will be sent to a client at its request.Additionally,
you can specify the first IP address that will be assigned to the clients and the number of
allocatable IP addresses.
NOTE: There should be only one DHCP server on the LAN;otherwise,DHCP would not work
properly.If there is already a DHCP server on the LAN,disable the DHCP server functionality of
the SMC2582W-B.
NOTE: By default the DHCP server function is disabled.
3.4.2.2. Static DHCP Mappings
Fig. 35.Static DHCP mappings.
IP addresses of servers are often static so that clients could always locate the servers by the static IP
addresses.By Static DHCP Mappings,you can ensure that a host will get the same IP address
when it requests one from the DHCP server.Therefore,instead of configuring the IP address of an
intranet server manually, you can configure the server to obtain an IP address by DHCP and it is
32