Owner manual

6. Select “PPP over Ethernet”
and click the “Save” button.
7. Key in your Account Name
and Password in the
appropriate fields.
If your ISP has supplied you
with a Service Name, enter it
in the “Service Name” field;
otherwise, leave it blank.
8. Click “Save”, and then click the “Reboot” button.
9. When prompted to reboot now, click “OK.”
10.Once the Barricade is rebooted, you can surf the Internet as
you normally would from all computers connected to it.
Configuring Your Barricade
for a DSL Modem with a Log-In Name and Password
1. Open your web browser (i.e. Internet Explorer
or Netscape Navigator).
2. In the “Location” field (for Netscape)
or “Address” field (for Internet
Explorer), type
“http://192.168.123.254”
and press <ENTER>.
3. In the ”System Status”
page of the Barricade web
console, type your password
in the “System Password”
field (default is “admin”) and
click the “Log In” button.
4. Click “Primary Setup”
5. Under “WAN Type” Click the
“Change…” button.
English
English