Owner manual

Installing and Configuring the Print Server
If you are not connecting your printer to your Barricade,
skip this section.
1. Insert the installation CD into the
CD-ROM drive. The installation screen
will automatically appear.
(If it doesn’t, please click “Start”,
and then “Run…” Then type
<CD-ROM Drive>“:\install.exe”
and click “OK.” .)
2. Click the “Install” button. Follow the prompts on the screen.
After rebooting your computer, the software installation is
complete, but your computer must still be configured.
3. Click “Start”, click “Settings”,
and then select “Printers.”
4. Right click the printer
connected to the
Barricade, then click
“Properties.”
Wireless Setting
Wireless settings allow you to set the wireless configuration items.
1. Network ID (SSID): Network ID is used to identify the WLAN.
Client stations can roam freely on this product and other
Access Points that have the same Network ID.
(The factory setting is “default”)
2. Channel: The radio channel number. The permissible number
of channels depends on the Regulatory Domain.
The factory setting is as follow: Channel 6 for North America;
Channel 7 for European (ETSI); Channel 7 for Japan.
3. WEP Security: Select the data privacy algorithm you want.
Enabling the security can protect your data while it is
transferred from one station to another. The standardized
IEEE 802.11 WEP (128 or 64-bit) is used here.
4. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP
key security, please select one WEP key to be used and input
26 (for 128-bit) or 10 (for 64-bit) hexi-decimal digits.
English
English