Owner manual

Configuring Your Barricade
for a Cable Modem
1. Open your web browser
(i.e. Internet Explorer or
Netscape Navigator).
2. In the “Location”
field (for Netscape)
or “Address” field
(for Internet Explorer),
type “http://192.168.123.254”
and press <ENTER>.
3. In the ”System Status”
page of the Barricade
web console, type your
password in the
“System Password” field
(default is “admin”)
and click the
“Log In” button.
4. Click “Primary Setup”
5. Under “WAN Type”
Click the “Change…”
button.
6. Select “Dynamic IP
Address” and click the
“Save” button.
7. Key in your “Host Name”
if your Internet Service
Provider has given you
one (i.e. CX123456-A).
8. Click “Save”, and then
click the “Reboot” button.
9. When prompted to reboot
now, click “OK.”
10.Once the Barricade is
rebooted, you can surf the Internet
as you normally would from all
computers connected to it.
English
English