User's Manual

Step 7: Select “A specific IP Address” from the “Destination address” field and enter the IP
address (192.168.1.1).
Step 8:
If you want to select a protocol for your filter, click the Protocol tab and continue with
step 8 through step 17 from the previous section.
The Edit Rule Properties window opens.
Step 9:
Select the “Tunnel Setting” tab.
Step 10:
Check “The tunnel endpoint is specified by this IP address” and enter “192.168.1.1.”
Step 11:
Select the “Connection Type” tab.
Step 12:
On the “Connection Type” page, select All Network connections.