Manualshelf

Modem User Manual

ManualsBrandsSMC Networks ManualsModemSMCD3GN
21222324252627282930
Configuring Your Computer for TCP/IP
Configuring an Apple
®
Macintosh
®
Computer
The following procedure describes how to configure TCP/IP on an Apple Macintosh running
Mac OS 10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform
and the screens you see may differ slightly from the following. However, you should still be
able to use this procedure as a guide to configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that NIC connected to the SMCD3GN is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 10).
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Figure 10. Selecting Using DHCP in the Configure Field
23
SMCD3GN Wireless Cable Modem Gateway User Manual