Modem User Manual

Configuring Your Gateway

Figure 17. Ether Switch Port Control Menu

The following procedure describes how to change the settings in the Ether Switch Port

Control menu.

1. To change a port from auto-negotiation to a fixed speed and duplex setting:

a. Uncheck the Auto check box for the port.

b. Click the radio that corresponds to the fixed speed you want to use for that port.

c. Under the Mode H/F column, leave the check mark for full-duplex mode or uncheck it

for half-duplex mode.

2. To disable a port, regardless of the auto-negotiation and duplex settings, uncheck Enable

for the port.

3. Click Apply.

SMCD3GN Wireless Cable Modem Gateway User Manual