USER GUIDE WiShare Wireless TV Adapter SMCWTVA100
Wireless TV Adapter User Guide No. 1, Creation Road III, Hsinchu Science Park, 30077, Taiwan, R.O.C.
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2013 by SMC Networks, Inc. No.
WARRANTY AND PRODUCT REGISTRATION To register SMC products and to review the detailed warranty statement, please refer to the Support Section of the SMC Website at http:// www.smc.com.
COMPLIANCES FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied: ◆ Health (Article 3.1(a) of the R&TTE Directive) ■ ◆ Safety (Article 3.
ABOUT THIS GUIDE PURPOSE This guide details the hardware features of the wireless TV adapter, including its physical and performance-related characteristics, and how to install the device and use its configuration software. AUDIENCE This guide is for Smart Phone and PC users with a working knowledge of computers. You should be familiar with Windows and Android operating system concepts.
CONTENTS WARRANTY AND PRODUCT REGISTRATION 4 COMPLIANCES 5 ABOUT THIS GUIDE 7 CONTENTS 8 FIGURES 11 TABLES 14 1 INTRODUCTION 15 Overview of the Wireless TV Adapter 15 Main Features 15 Package Contents 16 Key Hardware Features 16 2 SYSTEM REQUIREMENTS AND CONNECTIONS 18 System Requirements for PC to TV Mode 18 System Requirements for Mirror PBC and PIN Mode (Miracast) 18 System Requirements for Media Share Mode (DLNA) 19 3 INSTALLATION GUIDE 20 How to Connect the TV Adapter
CONTENTS 5 OPERATION MODES 45 PC to TV Mode 45 Using PC to TV (Windows PC Users) 45 Additional PC to TV Controller Menu Items 47 Mirror PIN and PBC Mode 48 Mirror PBC Versus PIN Mode 48 Setup Mirror PBC or PIN From an Android Device 49 Media Share Mode (DLNA Mode) 53 Using AirFun (Windows PC Users) 53 Using iMediaShare (Android Users) 58 Using iMediaShare (iOS Users) 60 NAS (USB) Mode 63 Using NAS Mode 63 Additional Controls In NAS (USB) Mode 64 Firmware Upgrade 64 Remote Opti
CONTENTS Mode Switch 76 Additional Functions 77 Status 77 Configuration 77 Remote 78 Restart 78 Reset to Factory Default Configuration 78 7 SPECIFICATIONS 79 – 10 –
FIGURES Figure 1: Rear View 16 Figure 2: Side View 17 Figure 3: Connecting to the SMCWTVA100 using a PC 22 Figure 4: Enter the URL of the SMCWTVA100 22 Figure 5: Web UI Login 23 Figure 6: Quick Setting 23 Figure 7: Stand-Alone Connection Setup 24 Figure 8: Bridge to Wireless Connection Setup 25 Figure 9: Bridge to Ethernet (Wired) Connection Setup 26 Figure 10: “Wired” Connection Setup 27 Figure 11: Wireless Connection Setup 27 Figure 12: Setup Wizard Start 29 Figure 13: Google Play
CONTENTS Figure 32: Mirror Mode—Connecting 51 Figure 33: Mirror Mode—Connected 52 Figure 34: Media Share Mode 53 Figure 35: Connect to SMCWTVA100 53 Figure 36: Launch AirFun 54 Figure 37: Search and Connect to Device 54 Figure 38: AirFun Activate 54 Figure 39: Select Photos 55 Figure 40: View Photo 55 Figure 41: Select Audio File 56 Figure 42: Play Audio File 56 Figure 43: Select Video File 57 Figure 44: Play Video 57 Figure 45: Connect to SMCWTVA100 58 Figure 46: Launch iMediaS
CONTENTS Figure 68: Display Settings 75 Figure 69: Password Setting 76 Figure 70: Mode Switch 76 Figure 71: Status Menu 77 Figure 72: Configuration Menu Item 77 Figure 73: Remote Menu Item 78 Figure 74: Restart Confirmation Dialog Box 78 – 13 –
TABLES Table 1: System Requirements (PC to TV Mode) 18 Table 2: Current Miracast Devices Supported 18 Table 3: System Requirements (Media Share Mode) 19 Table 4: Remote Option Button Menus 66 – 14 –
1 INTRODUCTION This chapter includes these sections: ◆ Overview of the Wireless TV Adapter ◆ Package Contents ◆ Key Hardware Features OVERVIEW OF THE WIRELESS TV ADAPTER Enjoy all of your personal and online content on a big screen with a simple wireless connection. The SMCWTVA100 can use PC to TV, Media Share (DLNA or Digital Living Network Alliance), Miracast and USB drive transfer technology to share your mobile device or laptop content through a Wi-Fi link to your TV or room projector.
CHAPTER 1 | Introduction Package Contents PACKAGE CONTENTS The packaging should contain the following items: ◆ SMCWTVA100 ◆ HDMI cable ◆ AV Cable ◆ Power adapter ◆ Quick Installation Guide ◆ Resource CD, including this User Guide and AirFun Software NOTE: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor.
CHAPTER 1 | Introduction Key Hardware Features 3. ETHERNET LAN PORT This port connects the TV adapter to a LAN over Ethernet. For example, you can connect it to a spare port on your home WI-FI router. 4. POWER BUTTON When the DC power adapter is attached and connected to a power source, the power button must be depressed to power on the unit. 5. DC 5V The micro-USB power socket is where you connect the power adapter.
2 SYSTEM REQUIREMENTS AND CONNECTIONS This chapter includes these sections: ◆ System Requirements for PC to TV Mode ◆ System Requirements for Mirror PBC and PIN Mode (Miracast) ◆ System Requirements for Media Share Mode (DLNA) SYSTEM REQUIREMENTS FOR PC TO TV MODE PC to TV software uses a proprietary protocol similar to Wi-Di however, instead of being limited to the few models that support Wi-Di, you can use it on any Windows 7 or Windows 8 OS computer.
CHAPTER 2 | System Requirements and Connections System Requirements for Media Share Mode (DLNA) NOTE: Android 4.2 or higher smartphones and tablets with Miracast support for Wi-Fi Direct Transfer. SYSTEM REQUIREMENTS FOR MEDIA SHARE MODE (DLNA) The SMCWTVA100 is designed to be a DLNA-DMR (digital media renderer) device, which means you are able to stream video, music, and photo content from a PC (Windows 7 or Windows 8 OS), smartphone, or tabletPC to your TV.
3 INSTALLATION GUIDE The sections that follow describe the hardware and software installation procedures and some additional configuration required to connect your SMCWTVA100 into your existing LAN or WLAN.
CHAPTER 3 | Installation Guide Install Screencasting Software INSTALL SCREENCASTING SOFTWARE Whether you want to use a PC, tablet or smartphone with the SMCWTVA100, your devices will need screencasting software to be able to display and play your device contents. 1. Download and install the required software on your PC, smartphone, or tablet. ■ For Windows 7 and 8 users, install the PC to TV and AirFun application from the Resource CD. Follow the on-screen instructions.
CHAPTER 3 | Installation Guide Connect a Device to the SMCWTVA100 Figure 3: Connecting to the SMCWTVA100 using a PC Select and then connect to the SMCWTVA100 access point. 3. Enter the URL of the SMCWTVA100 Web UI (http://192.168.59.254/ remote/admin.html) into the address bar of your web browser. See Figure 4 below; the “Setup:” field. Figure 4: Enter the URL of the SMCWTVA100 CONNECT TO THIS DEFAULT SSID USING WI-FI. INPUT THIS URL INTO YOUR BROWSER’S ADDRESS FIELD. 4.
CHAPTER 3 | Installation Guide Connect a Device to the SMCWTVA100 ■ smcadmin Figure 5: Web UI Login 5. In the menu selection on the left, click on the “Quick Setting” menu item. The Quick Setting menu appears as shown in Figure 6. Figure 6: Quick Setting 6. The Quick Setting menu allows your PC, tablet or smartphone to use a wireless connection to the SMCWTVA100 to screencast over and, if necessary, simultaneously allow your device to have Internet access.
CHAPTER 3 | Installation Guide Connect a Device to the SMCWTVA100 NOTE: Using an Ethernet cable can increase your device’s Internet speed as compared to the “Bridge to Wireless” mode.. ■ To use your SMCWTVA100 without an Internet connection (no bridge, see Figure 7 on page 24), select “Virtual AP only” (default setting). Click Apply and no further steps are necessary. You are now ready to use the SMCWTVA100 in the Virtual AP (stand-alone) configuration.
CHAPTER 3 | Installation Guide Connect a Device to the SMCWTVA100 Figure 8: Bridge to Wireless Connection Setup NOTE: The device will receive a new IP address from the wireless AP that it connects to. Use that new IP address to log into the device from your web browser. The new address and URL will be shown on the initial screen that is output from the HDMI connection to a display device. 8.
CHAPTER 3 | Installation Guide Non-Bridged Connection Setups Figure 9: Bridge to Ethernet (Wired) Connection Setup NOTE: The SMCWTVA100 will receive a new IP address from the LAN it connected to over the Ethernet cable. Use that IP address to log into the device from your web browser. The new address and URL will be shown on the initial screen that is output from the HDMI connection to a display device.
CHAPTER 3 | Installation Guide Non-Bridged Connection Setups Figure 10: “Wired” Connection Setup WIRELESS In this mode, as shown in Figure 11, your SMCWTVA100 connects directly CONNECTION SETUP to a local WLAN using its Wi-Fi interface. All devices (except those using Miracast) can connect to the SMCWTVA100 over the local W/LAN in order to screencast. Use the “Bridge over Wireless” mode in the Quick Connect setup to use this mode.
CHAPTER 3 | Installation Guide Non-Bridged Connection Setups NOTE: Power must be connected to the SMCWTVA100 while you are simultaneously pressing the Mode and Power On/Off buttons for 5 seconds.
4 SOFTWARE INSTALLATION This chapter shows you how to quickly install both the AirFun and PC to TV software plus the iMediaShare App.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 2. Select “Typical Installation” to install both Airfun and PC to TV software. Otherwise, select “Custom Installation” to install only one of the two. When you have made your selection, click “Install”. 3. From the drop-down menu select the desired language and then click the left button at the bottom to continue. 4. Wait for the software preparation procedure to complete.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 5. When the install preparation is completed click Next to continue the Airfun install. 6. Select the target install folder for the Airfun software or click the “Change” button and select a new folder. When ready click Next.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 7. Confirm that you are ready to install Airfun. Click Back to change your Airfun install settings otherwise click “Install” to continue the Airfun software installation. 8. When the Airfun software is installed the “Wizard Completed” box will appear. Check the Launch “Airfun” box and click “Finish” if you want to use Airfun immediately.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 9. Select the desired language from the drop-down menu and click “OK”. 10. In the welcome screen click the Next button.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 11. Click Next to accept the target directory for the PC to TV software installation. Otherwise, select a new target directory by clicking the “Browse” button and then click Next. 12. To accept the default start menu location click Next. Otherwise click Browse to select a new start menu location and then click Next.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 13. Verify the target installation directory and the start menu location and then click Install. 14. Wait for the software installer to complete.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 15. When the “Waiting for Connection” box appears, connect your PC to the SMCWTVA100 over wireless and wait for the Next Step button to become solid. 16. Click the Next Step button when it becomes solid (it becomes solid when the installer has detected a wireless connection to the SMCWTVA100).
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 17. The installer will launch the Quick Settings menu in your browser. Select the network connection suitable for your network and click “Apply”. See Step 6 on page 23 of the device connection procedure. Select one of three modes: ■ Bridge to Wireless—The SMCWTVA100 connects to a local WLAN over wireless and bridges Internet connectivity from the WLAN to your PC, smartphone or tablet.
CHAPTER 4 | Software Installation PC to TV and AirFun Installation (Windows) 18. The PC to TV software installer is finished. Click “Finish” to close the installer. 19. Once the installation is completed, the PC to TV software requires the PC to reboot before you can use it. Make sure you reboot the PC before using your new software.
CHAPTER 4 | Software Installation iMediaShare App Installation (Android) IMEDIASHARE APP INSTALLATION (ANDROID) To install the iMediaShare app for an Android smartphone or tablet, follow these steps: NOTE: Only the installation interface for an Android smartphone is shown in this guide. However, the app installation screens are similar for all Android systems. 1. Go to Google Play from the smartphone desktop. Figure 13: Google Play Store 2. Search DLNA software app, then select “iMediaShare Lite”.
CHAPTER 4 | Software Installation iMediaShare App Installation (Android) 3. Click “Install” to start the installation. Figure 15: Install iMediaShare App - Android Users 4. Click “Accept & download”.
CHAPTER 4 | Software Installation iMediaShare App Installation (Android) 5. The iMediaShare app is installed. Figure 17: iMediaShare App is Installed - Android Users 6. Launch iMediaShare app and start to share your photos, music and videos.
CHAPTER 4 | Software Installation iMediaShare App Installation (iOS) IMEDIASHARE APP INSTALLATION (IOS) To install the iMediaShare app for an iPad or iPhone, follow these steps: NOTE: Only the installation interface for an iPad is shown in this guide. However, the app installation screens are similar for all iOS systems. 1. Go to App Store from the iPad desktop. Figure 19: App Store 2. Search DLNA software app, then select “iMediaShare Lite”.
CHAPTER 4 | Software Installation iMediaShare App Installation (iOS) 3. Click “Install App” and wait for the software installation procedure to complete. Figure 21: Install iMediaShare App - iOS Users 4. The iMediaShare app will display on the desktop when installation is complete.
CHAPTER 4 | Software Installation iMediaShare App Installation (iOS) 5. Launch iMediaShare app and start to share your photos, music and videos.
5 OPERATION MODES This chapter includes these sections: ◆ PC to TV Mode ◆ Mirror PIN and PBC Mode ◆ Media Share Mode (DLNA Mode) ◆ NAS (USB) Mode ◆ Firmware Upgrade ◆ Remote Options ◆ Setup Using the OSD Menu PC TO TV MODE PC to TV mode allows the SMCWTVA100 to screencast your PC display image to the display device connected to the HDMI/CVBS output ports. Any video, image, document and presentations can be instantly displayed from your PC to a television, projector or separate monitor.
CHAPTER 5 | Operation Modes PC to TV Mode Figure 24: PC to TV Mode Screen Use these two items in Step 5. 4. Start the PC to TV client program already installed on the PC, either from the Start menu or clicking on the PC to TV shortcut icon. Figure 25: PC to TV Icon 5. The PC to TV Server Selection and Login window (Figure 26) will appear; select the correct SMCWTVA100 xxx and input the login code.
CHAPTER 5 | Operation Modes PC to TV Mode Figure 27: PC to TV Controller Play Stop 7. To stop screencasting your PC display, simply click the stop button. ADDITIONAL PC TO TV CONTROLLER MENU ITEMS Click the Mute button to reduce the audio output level to zero. Click the Volume Up button to increase the audio output level. Click the Volume Down button to decrease the audio output level. Click the Information icon to display current SMCWTVA100 configuration information.
CHAPTER 5 | Operation Modes Mirror PIN and PBC Mode Click the close program icon to exit and close the PC to TV controller. MIRROR PIN AND PBC MODE Mirror PBC and PIN mode allows you to screencast (display or mirror it on another screen) your Android device screen to a TV display. You can use it to display any content currently viewable on your Android device’s screen onto a television or other display device. Your Android device can stream up to 1080p HD video and 5.
CHAPTER 5 | Operation Modes Mirror PIN and PBC Mode SETUP MIRROR PBC 1. Click the mode switch on the side of the SMCWTVA100 until it is in either the Mirror PBC or PIN mode. OR PIN FROM AN ANDROID DEVICE Figure 28: Mirror Mode—SMCWTVA100 in Mirror PBC and PIN Mode. The SMCWTVA100 MAC address is displayed. 2. On your Android device, enter the settings menu for the device and select the “More...” menu item. Figure 29: Mirror Mode—Accessing Miracast Within Android Select More...
CHAPTER 5 | Operation Modes Mirror PIN and PBC Mode 3. In the “More...” menu item select “Miracast” Figure 30: Mirror Mode—Launching Miracast. Select the Miracast menu item. 4. Slide the switch at the right top of the screen to On. The Android device should find the SMCWTVA100 and list its MAC address, which is also displayed on the HDMI or CVBS output screen. Figure 31: Mirror Mode—Selecting the SMCWTVA100 Slide the switch to turn on the Miracast protocol.
CHAPTER 5 | Operation Modes Mirror PIN and PBC Mode 5. Select the device MAC address in the list. The “Connecting..” diagram will be displayed on the Android while the device is connected to the SMCWTVA100 over the Miracast protocol. Figure 32: Mirror Mode—Connecting Wait for Miracast to finish connecting your Android device to the SMCWTVA100. Wait for the connection. If you are using PIN mode, input the PIN code shown on the display output of the SMCWTVA100.
CHAPTER 5 | Operation Modes Mirror PIN and PBC Mode 6. After a few moments, you should see a “Wi-Fi Direct Succeed (Wait IP)” message on the SMCWTVA100 display output and then, a moment later, the Android device screen is displayed. Figure 33: Mirror Mode—Connected When connected you should see your Android screen shown on the display connected to the SMCWTVA100.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) MEDIA SHARE MODE (DLNA MODE) USING AIRFUN 1. Put the SMCWTVA100 into Media Share mode using the Mode button. (WINDOWS PC USERS) Figure 34: Media Share Mode 2. Start the Airfun software on your PC. 3. Select “SMCWTVA100” from the detected device list and click “Connect.” Now the TV adapter is connected.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) 4. Click the AirFun icon on your desktop to launch the software. Figure 36: Launch AirFun 5. AirFun will connect to the TV adapter automatically. Figure 37: Search and Connect to Device 6. The AirFun main screen displays.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) VIEW PHOTOS 7. Select the photo from the local PC and drag it to AirFun main screen “Photo/Music Playback” folder. Then click “Play”. Figure 39: Select Photos 8. The selected photo will display on your TV/monitor or projector. Figure 40: View Photo 9. To stop displaying photos at any time, click the red box with a white X located in the upper right corner of the Airfun photo window.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) PLAY AUDIO FILES 10. Select the audio file from the local PC and drag it to the AirFun main screen “Photo/Music Playback” folder. Then click “Play”. Figure 41: Select Audio File 11. The selected audio file will start to play on your TV/monitor or projector. Figure 42: Play Audio File 12. To stop playing audio at any time, click the red box with a white X located in the upper right corner of the Airfun audio player window.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) PLAY VIDEO FILE 13. Select the video file from the local PC and drag it to the AirFun main screen “Video Playback” folder. Then click “Play”. Figure 43: Select Video File 14. The selected video file will start to play on your TV/monitor or projector. Figure 44: Play Video 15. To stop playing a video at any time, click the red box with a white X located in the upper right corner of the Airfun video window.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) USING IMEDIASHARE 1. Enable your Wi-Fi connection and Connect to the SMCWTVA100 with ID “SMCWTVA100 XXX”. (ANDROID USERS) NOTE: Make sure the SMCWTVA100 is in MediaShare mode. Figure 45: Connect to SMCWTVA100 2. Launch the “iMediaShare” program and follow the instructions below to share the photo, music, or video.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) 3. From the screen, select the desired file type to play. NOTE: Only the photo display is shown in this section, music and video display screens are similar to the photo display. Figure 47: Select the Desired File Type 4. Select the photo from albums.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) 5. Select “SMCWTVA100 XXX” from the media list. Figure 49: Photo Ready for Display 6. The selected photo will display on your TV or monitor. For other advanced settings, see “Remote Options” on page 65. USING IMEDIASHARE 1. Enable your Wi-Fi connection and connect to the SMCWTVA100 with ID “SMCWTVA100 XXX”. (IOS USERS) NOTE: Make sure the SMCWTVA100 is in MediaShare mode.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) 2. Launch the “iMediaShare” program and follow the instructions below to share the photo, music, or video. Figure 51: Launch iMediaShare 3. From the screen, select the desired file type to play. NOTE: Only the photo display is shown in this section, music and video display screens are similar to the photo display.
CHAPTER 5 | Operation Modes Media Share Mode (DLNA Mode) 4. Select the photo from albums. Figure 53: Select a Photo 5. Select “SMCWTVA100 XXX” from the media list. Figure 54: Photo Ready for Display 6. The selected photo will display on your TV or monitor. For other advanced settings, see “Remote Options” on page 65.
CHAPTER 5 | Operation Modes NAS (USB) Mode NAS (USB) MODE In NAS (USB) mode, the SMCWTVA100 becomes your media player. Simply insert a USB device with video, image, or audio files and the USB file system will be displayed on your TV display. You can then use the virtual remote to navigate to the files that you would like to play or view, and then launch them. USING NAS MODE 1. Insert a USB flash stick into the SMCWTVA100 USB port. 2.
CHAPTER 5 | Operation Modes Firmware Upgrade Figure 56: Remote Functions for NAS (USB) Mode http://xxx.xxx.xxx.xxx/remote/ (xxx.xxx.xxx.xxx is the IP address of the SMCWTVA100) File Navigation Buttons Option Button for OSD Settings - See “Remote Options” on page 64. File Playing Controls ADDITIONAL CONTROLS IN NAS (USB) MODE Click the Home button to go back to the top of the file system. Click the Return button to go back to the previous page.
CHAPTER 5 | Operation Modes Remote Options 4. The device will upgrade the firmware automatically. The screen below will display on the TV/monitor. Figure 57: Upgrade Firmware 5. The device starts to upgrade firmware.
CHAPTER 5 | Operation Modes Remote Options Figure 59: Remote Control 2. Click on the Setup button to display an OSD menu to configure network, audio, video and system settings. For further information see “Setup Using the OSD Menu” on page 67. 3. While displaying image files or playing audio or video files, click the “Option” button to configure advanced OSD settings. 4. Depending on your media type you will be presented on the TV display with the optional settings as shown in Table 4.
CHAPTER 5 | Operation Modes Setup Using the OSD Menu 5. Click “Info” to download the AirFun software. Figure 60: Download AirFun Page 6. Click “Wifi Setup” to configure Wireless LAN Setup. Figure 61: Wireless LAN Setup 7. Click “Return” to go back to previous page. SETUP USING THE OSD MENU There are four OSD setup menu items accessible using the Remote Setup button: ■ Network—Sets wireless or wired network settings. ■ Audio—Sets advanced audio output settings.
CHAPTER 5 | Operation Modes Setup Using the OSD Menu NOTE: To access the remote, see “Setup Using the OSD Menu” on page 67" Figure 62: Setup Main Page NETWORK Use the navigation buttons on the remote to select the Network menu and click OK. The following menu items are available: ■ Wired Connection—Select this item to change the SMCWTVA100 IP settings to either DHCP or Fixed IP. ■ Device Name—Select this option to set a new device name for the SMCWTVA100.
CHAPTER 5 | Operation Modes Setup Using the OSD Menu ● ■ wireless operating region (select a country matching your region) Virtual AP Bridge—Depending on your SMCWTVA100 connection setup select the appropriate connection mode here for either wired, wireless or stand-alone operation. See “” on page 19". AUDIO Use the navigation buttons on the remote to select the Audio menu and click OK. The following menu items are available: VIDEO ■ Night Mode—Sets the audio output to night mode ON, OFF or Comfort.
CHAPTER 5 | Operation Modes Setup Using the OSD Menu SYSTEM ■ Language—Selects the menu language. Select either: English, Mandarin, Japanese, Spanish, French, German, or Italian. ■ Factory Default—Returns the SMCWTVA100 to the factory default configuration for all settings. ■ Version Info—Displays a list of all software versions currently installed on the SMCWTVA100.
6 WEB CONFIGURATION This chapter describes how you can use the built-in Web User Interface (Web UI) to configure the following SMCWTVA100 settings: ■ Network Topology and Settings ■ Wireless Configuration ■ Display Output Setting ■ Web UI Password ■ Mode Setting The Web UI also provides additional functions: ■ Status ■ Configuration ■ Remote ■ Restart NETWORK TOPOLOGY AND SETTINGS You can configure how the SMCWTVA100 is connected to your local network and whether to use DHCP or staticall
CHAPTER 6 | Web Configuration Wireless Configuration Figure 63: Network Settings IP ADDRESS SETTINGS ■ Obtain an IP address automatically—Check this radio button here to set the SMCWTVA100 to use DHCP to automatically receive its network IP settings from the LAN you connect it to. ■ Use the following address:—Check this radio button to configure the SMCWTVA100 IP settings manually: ■ ● IP Address—Enter the IPv4 address that the SMCWVTA100 is assigned for the local LAN.
CHAPTER 6 | Web Configuration Wireless Configuration Figure 64: Wireless Settings - Basic Setting ■ Device Name(SSID)—Input an SSID name (Maximum 20 alphanumeric characters). SECURITY SETTINGS The Security Settings allow you to turn on WPA2/WPA encryption settings to secure access to the SMCWTVA100 wireless AP. Figure 65: Wireless Settings-Security Settings ■ Encryption—From the drop-down menu, select either the WPA2/ WPA security/encryption standard or Disabled to turn off security and encryption.
CHAPTER 6 | Web Configuration Wireless Configuration GHz Wi-Fi coverage area then it is advisable to set the operation band to 5 GHz to reduce interference. Figure 66: Wireless Settings-Band Settings ■ Band—From the drop-down menu, select either the 2.4GHz (B+G+N) or 5GHz (preferred) option and click the Apply button to set the SMCWTVA100 wireless band. VIRTUAL AP BRIDGE The Virtual AP Bridge menu item provides the same functionality as the Quick Setting menu item.
CHAPTER 6 | Web Configuration Display Output Setting ● Virtual AP only—Select this item to set your SMCWTVA100 to operate in standalone mode and only provide a wireless connection to devices without internet. ● Bridge to Ethernet—Select this item to set your SMCWTVA100 to connect to a LAN over Ethernet cable. Using this option you can connect to SMCWTVA100 over the LAN or use the SMCWTVA100 wireless connection.
CHAPTER 6 | Web Configuration Mode Setting Figure 69: Password Setting MODE SETTING MODE SWITCH Besides the mode button located on the side panel of the SMCWTVA100, in this menu you can select to put the SMCWTVA100 into either PC to TV or Media Share mode. Figure 70: Mode Switch ■ Click the down arrow and select either PC to TV mode or Media Share mode and then click the Apply button.
CHAPTER 6 | Web Configuration Additional Functions ADDITIONAL FUNCTIONS STATUS Click on the Status menu item to display the hardware, firmware and current network and wireless settings used by the SMCWTVA100. Figure 71: Status Menu CONFIGURATION Within the configuration menu item you can find a link button which will automatically load the SMC support page for the SMCWTVA100. On the support page you will find the latest updates, documents, drivers and firmware for the SMCWTVA100.
CHAPTER 6 | Web Configuration Additional Functions REMOTE The Remote menu item will bring up the virtual Remote controller within the framework of the Web UI. Figure 73: Remote Menu Item ◆ For further information, see “Remote Options” on page 65 RESTART Clicking the Restart menu item will reboot the SMCWTVA100. A confirmation dialog box will prevent you from accidently rebooting the SMCWTVA100. Click the OK button to continue otherwise click Cancel to stop the reboot.
7 SPECIFICATIONS PHYSICAL INTERFACE LAN Port:10/100 Mbps USB Input: USB2.0 Type A x 1 (firmware upgrade only) HDMI Output: HDMI x 1 AV Composite Power Button Reset Button WI-FI STANDARDS 2.4/5 GHz 802.11/b/g/n 2.4 GHz Channels: 11:(CH1-11): United Stated 13:(CH1-13): Europe 14:(CH1-14): Japan 5.
CHAPTER 7 | Specifications SAFETY LVD (EN60950) SECURITY WPA TEMPERATURE Operating: 0 °C to 40 °C (32 to 104 °F) Storage: 0 °C to 40 °C (32 to 104 °F) HUMIDITY Operating: 10% to 90% (non-condensing) Storge: 10%-90% (non-condensing) – 80 –
Headquarters No. 1, Creation Rd. III Hsinchu Science Park Taiwan 30077 Tel: +886 3 5638888 Fax: +886 3 6686111 (for Asia-Pacific): Technical Support information at www.smc-asia.com www.smcnetworks.co.kr SMCWTVA100 www.smc.
