User's Manual

C HAPTER 1 | Introduction
Key Hardware Features
– 17 –
3. ETHERNET LAN PORT
This port connects the TV adapter to a LAN over Ethernet. For example,
you can connect it to a spare port on your home WI-FI router.
4. POWER BUTTON
When the DC power adapter is attached and connected to a power source,
the power button must be depressed to power on the unit.
5. DC 5V
The micro-USB power socket is where you connect the power adapter. Use
the power adapter provided with the TV adapter or any suitable device
which can supply DC voltage over a USB connection.
Figure 2: Side View
The following items are located on the side panel (from left to right).
6. USB PORT
This port is for upgrading firmware only. Connect an external USB storage
device, such as a thumb drive, to this port.
7. MODE BUTTON
Press the button to switch between PC to TV, Miracast PBC/PIN,
MediaShare, and USB modes.
67