User's Manual

HAPTER

| Operation Modes

Setup Using the OSD Menu

– 68 –

OTE

To access the remote, see “Setup Using the OSD Menu” on page 67"

Figure 62: Setup Main Page

NETWORK Use the navigation buttons on the remote to select the Network menu and

click OK. The following menu items are available:

■

Wired Connection—Select this item to change the SMCWTVA100

IP settings to either DHCP or Fixed IP.

■

Device Name—Select this option to set a new device name for the

SMCWTVA100. Note the default name is always: SMCWTVA100 xxx.

■

WIFI Connection—In Bridge to Wireless mode select this option to

connect the SMCWTVA100 to a Wi-Fi access point.

■

Virtual AP Setup—Use this menu item to change the

SMCWTVA100’s wireless access point settings such as:

●

radio band (2.4 or 5 GHz)

●

wireless security (disabled or WPA/WPA2)

●

wireless security password