User's Manual

HAPTER

| Web Configuration

Wireless Configuration

– 74 –

GHz Wi-Fi coverage area then it is advisable to set the operation band to 5

GHz to reduce interference.

Figure 66: Wireless Settings-Band Settings

■

Band—From the drop-down menu, select either the 2.4GHz

(B+G+N) or 5GHz (preferred) option and click the Apply button to

set the SMCWTVA100 wireless band.

VIRTUAL AP BRIDGE The Virtual AP Bridge menu item provides the same functionality as the

Quick Setting menu item. From the drop-down menu you can select to

connect the SMCWTVA100 to a local LAN either using a wireless or

Ethernet cable connection. As in the Quick Setting menu item you can also

select the Virtual AP option to use the SMCWTVA100 in standalone mode

and connect your device directly to the SMCWTVA100 without internet.

Figure 67: Virtual AP Bridge

■

Virtual AP Bridge—Click the down arrow to select one of the

following items from the drop-down menu:

●

Bridge to Wireless—Select this item to set your SMCWTVA100

to connect a Wireless LAN. Using this option you can connect to

SMCWTVA100 over the Wireless LAN or use the SMCWTVA100

wireless connection. When using the SMCWTVA100 wireless

connection in this mode you can then access the local Wireless

LAN and Internet through the SMCWTVA100 as a bridge.