User's Manual

C HAPTER 6 | Web Configuration
Display Output Setting
– 75 –
●
Virtual AP only—Select this item to set your SMCWTVA100 to
operate in standalone mode and only provide a wireless
connection to devices without internet.
●
Bridge to Ethernet—Select this item to set your SMCWTVA100
to connect to a LAN over Ethernet cable. Using this option you
can connect to SMCWTVA100 over the LAN or use the
SMCWTVA100 wireless connection. When using the
SMCWTVA100 wireless connection in this mode you can then
access the local LAN and Internet through the SMCWTVA100 as
a bridge.
DISPLAY OUTPUT SETTING
DISPLAY SETTING You can modify the screen resolution, refresh rate and television standard
output of the HDMI port using this menu item. It is recommended to use
the HDMI Auto Detect setting. If your screencast fails then select the
display output setting that best matches your display device capability.
Figure 68: Display Settings
■
HDMI Output Resolution—Click the down arrow to select the
desired HDMI output signal.
WEB UI PASSWORD
PASSWORD SETTING To change the Web UI access password, select this menu item and enter
the current password along with the new password (2x).