User manual

C ONFIGURING THE S WITCH
3-160
Configuring Uplink and Downlink Ports
Use the Private VLAN Link Status page to set ports as downlink or uplink
ports. Ports designated as downlink ports can not communicate with any
other ports on the switch except for the uplink ports. Uplink ports can
communicate with any other ports on the switch and with any designated
downlink ports.
Web – Click VLAN, Private VLAN, Link Status. Mark the ports that will
serve as uplinks and downlinks for the private VLAN, then click Apply.
Figure 3-67 Private VLAN Link Status
CLI – This configures ports 3 and 4 as uplinks and ports 5 and 6 as
downlinks.
Console(config)#pvlan up-link ethernet 1/3-4 downlink ethernet 1/5-6 4-247
Console(config)#end
Console#show pvlan
Private VLAN status: Enabled
Up-link port:
Ethernet 1/3
Ethernet 1/4
Down-link port:
Ethernet 1/5
Ethernet 1/6
Console#