User manual

C OMMAND L INE I NTERFACE
4-82
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-12.
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: SMC Networks SMC8612T2
System OID string: 1.3.6.1.4.1.202.20.52
System information
System Up time: 0 days, 2 hours, 3 minutes, and 47.49 seconds
System Name : R&D 5
System Location : WC 9
System Contact : Geoff
MAC address : 00-00-A3-42-00-80
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
Telnet server : enable
Telnet port : 23
POST result
UART 1 LOOP BACK Test........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device 1 Test............PASS
PCI Device 2 Test............PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#