User manual

LASH

ILE

OMMANDS

4-87

Command Usage

• The system prompts for data required to complete the copy

command.

• The destination file name should not contain slashes (\ or /), the

leading letter of the file name should not be a period (.), and the

maximum length for file names on the TFTP server is 127 characters

or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,

“.”, “-”, “_”)

• Due to the size limit of the flash memory, the switch supports only

two operation code files.

• The maximum number of user-defined configuration files depends on

available memory.

• You can use “Factory_Default_Config.cfg” as the source to copy

from the factory default configuration file, but you cannot use it as the

destination.

• To replace the startup configuration, you must use startup-config as

the destination.

• For information on specifying an https-certificate, see “Replacing the

Default Secure-site Certificate” on page 3-40. For information on

configuring the switch to use HTTPS/SSL for a secure connection,

see “ip http server” on page 4-41.