User manual

C
OMMAND
L
INE
I
NTERFACE
4-96
Default Setting
10.1.0.1
Command Mode
Global Configuration
Example
radius-server port
This command sets the RADIUS server network port. Use the no form to
restore the default.
Syntax
radius-server port port_number
no radius-server port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server host 192.168.1.25
Console(config)#
Console(config)#radius-server port 181
Console(config)#