User manual

A UTHENTICATION C OMMANDS
4-105
dot1x system-auth-control
This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
authentication dot1x default
This command sets the default authentication server type. Use the no
form to restore the default.
Syntax
authentication dot1x default radius
no authentication dot1x
dot1x timeout
re-authperiod
Sets the time period after which a
connected client must be
re-authenticated
IC 4-110
dot1x timeout tx-period Sets the time period during an
authentication session that the switch
waits before re-transmitting an EAP
packet
IC 4-111
show dot1x Shows all dot1x related information PE 4-111
Console(config)#dot1x system-auth-control
Console(config)#
Table 4-31 802.1X Port Authentication Commands (Continued)
Command Function Mode Page