User manual

C
OMMAND
L
INE
I
NTERFACE
4-106
Default Setting
RADIUS
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their
default values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
dot1x max-req
This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Console(config)#authentication dot1x default radius
Console(config)#
Console(config)#dot1x default
Console(config)#