INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS
EN CONTENTS CONTENTS 1 INTRODUCTION ........................................................................................ 3 2 DESCRIPTION AND USE OF THE CONTROLS .......................................... 5 2.1 Upper panel ............................................................................................... 5 2.2 Setting the washing program and switching on and off............................... 6 2.2.1 Switching on .....................................................................
EN 2 Rev 0.
EN INTRODUCTION 1 INTRODUCTION Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. This user-friendly manual will provide answers to all your questions about use of the dishwasher.
EN INTRODUCTION Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. This symbol highlights general information and warnings. Tab. 1-01 4 Rev 0.
EN USER INSTRUCTIONS 2 DESCRIPTION AND USE OF THE CONTROLS 2.1 Upper panel All the dishwasher controls are grouped on the upper panel (see fig. 2-01). The dishwasher can only be switched on, programmed, switched off, etc. with the door open. A brief description (see tab. 2-01) of the various controls on the upper panel is given below. Fig. 2-01 Rev 0.
EN USER INSTRUCTIONS 1 2 3 4 5 6 7 8 9 10 11 12 On/off button Press to power the appliance. Program indicator lights These show which program is selected and whether there are any faults (Troubleshooting). Program selection button Press in sequence to select the required program. Add salt indicator light Shows the appliance has run out of salt. Add rinse aid Shows the appliance has run out of rinse aid. Supplementary program button Press to select one of the five supplementary programs (see table).
EN USER INSTRUCTIONS To select the most suitable program for the dishes to wash, consult the following table which specifies the most appropriate type of washing sequence depending on the kind of dishes and how dirty they are (see tabs. 2-02a and 2-02b). PROGRAM NUMBER AND SYMBOL DISHES AND CUTLERY PROGRAM SEQUENCE 1 RINSE Mixed dishes waiting to be washed Cold rinse (to prevent the dirt from drying).
EN USER INSTRUCTIONS PROGRAM NUMBER AND SYMBOL 6 7 8 DISHES AND CUTLERY PROGRAM SEQUENCE DISH WARMING Clean mixed Hot rinse at 69°C dishes to (156.2°F). rinse and heat Dry. before use CRYSTAL Slightly dirty crystal, porcelain and mixed dishes NORMAL AUTO SUPER WASH 9 ETL SANITATION LISTED EXTREME WASH 10 ETL SANITATION LISTED Normally dirty mixed dishes Very dirty mixed dishes Very dirty mixed dishes and pans Wash at 45°C (113°F). Cold rinse. Hot rinse at 69°C (156.2°F). Dry. Cold pre-wash.
EN USER INSTRUCTIONS Only run the soak program with half loads. The multi-zone option (ref. 9 fig. 2-02) is available for all programs, except soak. To run programs 6, 7, 8, 9, 10 (see tab. 2-02b), select the required standard program (see programs 1, 2, 3, 4, 5 in tab. 2-02a) and then press the supplementary program button (ref. 6 fig. 2-02). After using the above tables to choose the most suitable washing cycle, program the appliance.
EN USER INSTRUCTIONS SUPPLEMENTARY PROGRAMS The supplementary program button (ref. 6 fig. 2-02) adds five extra programs to the ones that can be directly selected with the program selection button. Press the button (the indicator light turns on) after selecting the “main” program (see 1, 2, 3, 4, 5 in tab. 2-02a). As the function is memorized, press the button again (the indicator light turns off) if you wish to run one of the 5 main programs for the next cycle. 2.2.
EN USER INSTRUCTIONS • Close the door again. • After about 1 minute, the dishwasher terminates the cycle and the indicator lights of the fourth and fifth programs (ref. pr. 4, pr. 5 fig. 2-03) start flashing. pr. 4 pr. 5 Fig. 2-03 2.2.7 Options MULTI-ZONE SELECTION (available for all programs except soak) This function should be used when some dishes are dirtier than others; load the dirtier dishes on the right- or left-hand side of the rack where washing power will then be concentrated.
EN USER INSTRUCTIONS When washing in just the lower rack is selected, the cutlery basket can be separated and just half used. PROGRAM DELAY (available for all programs except soak) The “Program delay” function delays the beginning of the washing program up to 9 hours from the moment in which programming takes place. This makes it possible to use the dishwasher at a certain time of day. Before programming a delay, open the door of the dishwasher, select the required washing program (see para 1.
EN USER INSTRUCTIONS 2.2.8 Switching off At the end of the program, the dishwasher emits a short beep and the indicator lights of the fourth and fifth program (ref. pr. 4, pr. 5 fig. 2-04) flash. Turn off the appliance by opening the door and pressing the on/off button (ref. 1 fig. 2-02). pr. 4 pr. 5 Fig. 2-04 2.3 Additional functions 2.3.1 Adjusting the water softener N.B.: a different washing program from soak must be used to make the following adjustment.
EN USER INSTRUCTIONS N.B.: the display indicates the water hardness adjustment and the program delay. A dot (.) after the number means that the water hardness adjustment is being displayed. If no dot (.) appears, the program delay is being displayed. 11 Fig. 2-05 Water hardness table (see tab. 2-03) WATER HARDNESS German degrees (°D) French degrees (°F) American degrees grains/galls SETTING 0-4 0-7 0 - 4.5 0. 5 - 15 8 - 25 4.6 - 14.5 1. 16 - 23 26 - 40 14.6 - 23.5 2.
EN USER INSTRUCTIONS 3 ENERGY SAVING AND ENVIRONMENTAL RESPECT Always try to run the dishwasher fully loaded. Do not wash the dishes under a running tap. Use the most suitable washing program for each type of load. Do not pre-rinse. If available, connect the dishwasher to a hot water system with a temperature of up to 60°C (140°F). • When possible, skip the drying cycle by opening the door after washing: the air and the residue heat will dry the dishes to perfection. • • • • • 3.
EN USER INSTRUCTIONS 4 REMOVING THE DISHES At the end of the washing program, wait at least 20 minute before removing the dishes in order to allow them to cool. 16 Rev 0.
EN USER INSTRUCTIONS 5 TROUBLESHOOTING The dishwasher can to signal a number of malfunctions by turning on various indicator lights, as described below (see following table): FAULT E1 E2 E3 E4 E5 DESCRIPTION Acquastop failure The anti-flooding system has tripped (only for models fitted with this feature). Activates in case of water leaks. Contact the technical assistance service. Safety level The system limiting the water level in the dishwasher has tripped. Interrupt the current program.
EN USER INSTRUCTIONS FAULT E6 E7 E8 E9 DESCRIPTION Water pump-out malfunction The appliance does not pump out the water or does so incorrectly. Make sure the drain hose is not kinked or crushed and that the siphon and filters are not clogged. If the problem persists, contact the technical assistance service. Turbine flow-regulator malfunction (only for models fitted with this feature) The appliance is unable to precisely measure the quantity of incoming water.
EN CONTENTS Contents 1 INTRODUCTION ........................................................................................ 3 2 IMPORTANT SAFETY INSTRUCTION ......................................................... 5 3 INSTALLATION AND HOOK-UP ............................................................... 12 4 OPERATING INSTRUCTIONS .................................................................. 15 4.1 Using the water softening system ..........................................................
EN 2 Rev 0.
EN INTRODUCTION 1 INTRODUCTION Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appliance’s functions. The texts are easy to understand and are complete with detailed illustrations. Following the cleaning instructions provided here will keep dishwasher performance at peak levels in the long term.
EN INTRODUCTION Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance. This symbol highlights general information and warnings. Tab. 1-01 4 Rev 0.
EN WARNINGS 2 IMPORTANT SAFETY INSTRUCTION (Save this instructions) THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER (INCLUDING THE “INSTALLATION” AND “DESCRIPTION OF CONTROLS” MANUALS, IF ATTACHED). BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE.
EN WARNINGS BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE MAINS POWER SUPPLY FROM THE WORK AREA. DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING WITH CONSEQUENT FIRE HAZARD. DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES. THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.
EN WARNINGS ONLY USE DETERGENTS SPECIALLY FORMULATED FOR DISHWASHERS. DO NOT USE DETERGENTS FORMULATED FOR WASHING DISHES BY HAND. ONLY USE RINSE-AID SPECIALLY FORMULATED FOR DOMESTIC DISHWASHERS. DO NOT INHALE OR SWALLOW DETERGENT AS THIS MAY CAUSE BURNS AND/OR PERMANENT DAMAGE TO THE NOSE, MOUTH AND THROAT, AND EVEN LEADING TO SUFFOCATION; KEEP DETERGENT AWAY FROM YOUR EYES. IF ONE OF THE ABOVE SITUATIONS OCCURS, SEEK MEDICAL ASSISTANCE IMMEDIATELY.
EN WARNINGS DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS. DO NOT INTRODUCE ITEMS IN HEAT-SENSITIVE PLASTI¬C, SUCH AS DISPOSABLE CUTLERY OR PLATES, AS THESE MAY BECOME DEFORMED. DO NOT WASH OBJECTS IN PLASTIC UNLESS THEY ARE MARKED “DISHWASHER PROOF” OR THE LIKE. FOR UNMARKED OBJECTS, FOLLOW THE INSTRUCTIONS OF THE MANUFACTURER; IF NO INFORMATION IS AVAILABLE, DO NOT WASH THESE OBJECTS IN THE DISHWASHER. DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER.
EN WARNINGS DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER. KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADE-DOWN, OR LAID HORIZONTAL IN THE RACK. TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT THEY DO NOT PROJECT FROM THE RACK. POSITION SHARP/POINTED OBJECTS SO AS TO PREVENT THEM FROM DAMAGING THE DOOR GASKETS. DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER PANELS HAVE BEEN POSITIONED CORRECTLY.
EN WARNINGS THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE REGULATIONS IN FORCE CONCERNING SAFETY AND ELECTRICAL EQUIPMENT. ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A TRAINED AND AUTHORIZED TECHNICIAN: REPAIRS CARRIED OUT BY UNAUTHORIZED PERSONS WILL INVALIDATE THE WARRANTY, AS WELL AS POSING A POTENTIAL HAZARD TO THE USER. BEFORE CLEANING OR SERVICING THE APPLIANCE, REMOVE THE PLUG OR TURN OFF THE MULTI-POLE SWITCH.
EN WARNINGS BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS. IF IN DOUBT ABOUT THE CONTENTS OF THIS MANUAL, CONTACT THE TECHNICAL ASSISTANCE SERVICE. Rev 0.
EN INSTALLATION INSTRUCTIONS 3 INSTALLATION AND HOOK-UP To install and hook up this appliance, consult the attached installation manual. Bear in mind the following warnings when installing and hooking up the dishwasher. DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES. INSTALLATION, REPAIRS AND SERVICING MUST BE PERFORMED BY QUALIFIED AND AUTHORIZED TECHNICIANS.
EN INSTALLATION INSTRUCTIONS CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE. THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PROVIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESISTANT PATH.
EN INSTALLATION INSTRUCTIONS DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING, WITH CONSEQUENT FIRE HAZARD. WARNING! ACCESS TO THE DOOR OPENING AND CLOSING MECHANISMS CAN ONLY PREVENTED AFTER INSTALLATION. IF THE APPLIANCE IS NOT BUILT IN OR IS BUILT IN BUT ONE OR BOTH FRONT PANELS HAVE NOT BEEN FITTED, SOME MECHANICAL PARTS ARE ACCESSIBLE. WHEN OPENING OR CLOSING THE DOOR, THESE MAY CAUSE SERIOUS INJURY TO LIMBS.
EN USER INSTRUCTIONS 4 OPERATING INSTRUCTIONS BEFORE STARTING TO USE THE APPLIANCE, MAKE SURE YOU HAVE READ AND UNDERSTOOD ALL THE WARNINGS CONTAINED IN CHAPTER 2 “IMPORTANT SAFETY INSTRUCTION”. Once the dishwasher has been correctly installed, prepare for use as follows: • adjust the water softening system; • add the regenerating salt; • add the rinse-aid and detergent. Rev 0.
EN USER INSTRUCTIONS 4.1 Using the water softening system The amount of scale contained in the water (water hardness index) can cause whitish staining on the dry dishes, which tend to become dull over time. The dishwasher is equipped with an automatic softening system which uses a special regenerating salt to reduce the hardness of the water. The dishwasher is factory set for water hardness level 3 (average hardness 41-60°dF – 24-31°dH / 23.6-35 gpg).
EN USER INSTRUCTIONS SA LT A Fig. 4-02 • When using the dishwasher for the first time, in addition to the salt it is also necessary to add one liter of water to the container. • Each time the salt container is refilled, make sure that the cap (ref. A fig. 4-01) is securely closed. The mixture of water and detergent must never penetrate the salt container, as this would compromise the operation of the regeneration system. In the event of this occurring, the warranty will be invalidated.
EN USER INSTRUCTIONS 4.2 Using the rinse-aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the rinse-aid dispenser (ref. A fig. 4-03) is on the left, and the detergent dispenser (ref. B fig. 4-03) is on the right. A B Fig. 4-03 WITH THE EXCEPTION OF THE SOAK PROGRAM, BEFORE EVERY WASHING CYCLE IT IS NECESSARY TO ADD THE REQUIRED AMOUNT OF DETERGENT TO THE DETERGENT DISPENSER.
EN USER INSTRUCTIONS 4.2.1 Adding the rinse-aid The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door. A B C Fig. 4-04 To add rinse aid: • Open the door. • Open the container cover (ref. A fig. 4-04). • Add the rinse aid until the container is full (approximately 140 ml). The optical level indicator (ref. B fig.
EN USER INSTRUCTIONS • To adjust the rinse-aid setting, open the cover (ref. A fig. 4-04). • Then use a screwdriver to rotate the rinse aid selector to the desired position. • Close the cover (ref. A fig. 4-04). • The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains. • If, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the rinse aid setting. 4.2.
EN USER INSTRUCTIONS A Fig. 4-06 • When a program with hot prewash is selected (see program table in the “Description of Controls” manual), extra detergent must be placed in the cavity (ref. A fig. 4-06). • Only use dishwasher-specific detergents. For optimal washing results it is important to use a good quality detergent. • The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results.
EN USER INSTRUCTIONS open completely during the washing cycle, tabs are not fully released (dissolved). This could generate the following problems: - insufficient detergent released during the cycle and poor washing results; - the detergent is compacted in the dispenser and is released during the final rinse cycle. THE INTRODUCTION OF DETERGENT INTO THE RINSE AID DISPENSER, EVEN IN LIQUID FORM, WILL DAMAGE THE DISHWASHER. 4.
EN USER INSTRUCTIONS MAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safe: • Wooden dishes, pots or pans: these may be damaged by the high washing temperatures. • Handcrafted items: these are rarely suitable for washing in a dishwasher. The relatively high water temperatures and the detergents used may damage them. • Dishes and objects in copper, tin, zinc or brass: these tend to stain. • Aluminum dishes: items made from anodized aluminum may lose their color.
EN USER INSTRUCTIONS 4.4 Using the rack The dishwasher has a capacity of 12 place-settings, including serving dishes. Examples of loading 12 place-settings in the rack (see figs. 4-07, 4-08). Fig. 4-07 Fig. 4-08 24 Rev 0.
EN USER INSTRUCTIONS To make the most of the space inside the rack when loading large items, it is equipped with tip-up supports for plates (see fig. 4-09). Fig. 4-09 The rack is fitted with a special support; if placed in the first position (ref. A fig. 4-10), it can hold normal glasses. In the second position, when locked with the special retainers (e.g.: ref. A fig. 4-11), the support can hold champagne flutes. A Fig. 4-10 Rev 0.
EN USER INSTRUCTIONS A Fig. 4-11 4.4.1 Cutlery basket (see fig. 4-12, 4-13, 4-14) The cutlery basket can be removed to simplify unloading. Arrange the cutlery in an orderly manner inside the basket, with the handles pointing downwards and taking care not to injure yourself with the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray arms.
EN USER INSTRUCTIONS Movement Movimento perrequired l’estrazione to extract inserts degli the inserti Inserti Vertical inserts verticali Inserto Horizontal insert closed orizzontale chiuso Inserto Horizontal orizzontale insert open aperto Fig. 4-12 Fig. 4-13 Fig. 4-14 Rev 0.
EN USER INSTRUCTIONS 5 CLEANING AND USER-MAINTENANCE BEFORE CARRYING OUT ANY WORK, ALWAYS DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY. 5.1 General warnings and recommendations NEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO CLEAN THE APPLIANCE. Clean the outer surfaces and door-lining of the dishwasher regularly using a soft cloth moistened with a neutral detergent (not abrasive and/or corrosive) suitable for painted surfaces. Clean the door gaskets with a damp sponge.
EN USER INSTRUCTIONS 5.2 Cleaning the water intake filter The water intake filter located at the outlet of the water supply tap needs to be cleaned periodically. After having closed the water supply tap, unscrew the end (ref. A fig. 5-01) of the water intake hose (use a pair of pliers, if necessary), and clean it delicately carefully, screw the water intake hose back into position (ref. A fig. 5-01) (use a pair of pliers, if necessary). A Fig. 5-01 5.
EN USER INSTRUCTIONS B A Fig. 5-02 . ••• A B Fig. 5-03 Fig. 5-04 30 Rev 0.
EN USER INSTRUCTIONS 5.4 Cleaning the filter unit • Periodically inspect the filter unit (ref. A fig. 5-05) and, if necessary, clean it under running water (at room temperature), using a stiff brush. To remove the filter, grip the tabs, turn anticlockwise and lift upwards; • push the centre filter (ref. A fig.
EN USER INSTRUCTIONS 5.5 General warnings and recommendations for correct maintenance • Clean the filters under running water (at room temperature) using a stiff brush. • When removing the filter, take care that there are no food residues on it. If any residues fall into the washing pit (ref. A fig. 5-07), they might block hydraulic components or foul the spray arm nozzles.
EN USER INSTRUCTIONS Before starting the dishwasher after prolonged disuse • Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes. • Plug the power cord back into the socket. • Reconnect the water intake hose and open the tap again. 5.
EN USER INSTRUCTIONS If the dishes show signs of streaking, staining, etc., check that: • the rinse aid dispenser setting is not too high. If there are visible traces of rust inside the tank: • the tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remove such marks. • check that the amount of detergent being used is correct.
EN USER INSTRUCTIONS 6 TECHNICAL DATA (SEE TAB. 6-01) Width 85,8 cm (33-13/16”) Depth measured flush with the outer edge of the control panel 55 cm (21-21/32”) Height 57,8 cm (22-3/4”) Capacity 12 standard place-settings Water supply pressure min. 7 - max. 130 PSI (min. 0.5 – max. 9 bar) Electrical characteristics See rating plate Tab. 6-01 Rev 0.
EN CONTENTS Contents 1 INTRODUCTION .........................................................................................3 2 SAFETY INFORMATION ............................................................................ 5 3 INSTALLATION MATERIAL ......................................................................... 8 3.1 Kit supplied with dishwasher ...................................................................... 9 4 DIMENSIONS OF DISHWASHER ..........................................
EN 2 Rev 0.
EN INTRODUCTION 1 INTRODUCTION Thank you for choosing one of our products. To install this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to installation of the appliance. The texts are easy to understand and are complete with detailed illustrations. This user-friendly manual will provide answers to all your questions about installation of the dishwasher.
EN INTRODUCTION Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance. This symbol highlights general information and warnings. Tab. 1-01 4 Rev 0.
EN WARNINGS 2 SAFETY PRECAUTIONS THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE AND MUST THEREFORE BE KEPT INTACT TOGETHER WITH THE MACHINE. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES WITH THE DIRECTIVES CURRENTLY IN FORCE, INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE.
EN WARNINGS TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER. DO NOT LEAVING DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS PACKAGING MATERIALS AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE. KEEP CHILDREN, PHYSICALLY AND/OR MENTALLY IMPAIRED ADULTS, AND ANIMALS AWAY FROM PACKAGING WASTE; DANGER OF SUFFOCATION. BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE MAINS POWER SUPPLY FROM THE WORK AREA.
EN WARNINGS DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING, WITH CONSEQUENT FIRE HAZARD. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS. IF IN DOUBT ABOUT THE CONTENTS OF THIS MANUAL, CONTACT THE TECHNICAL ASSISTANCE SERVICE. Rev 0.
EN INSTALLATION INSTRUCTIONS 3 INSTALLATION MATERIAL Per eseguire correttamente l’installazione della lavastoviglie, sono necessari i seguenti materiali: • Philips screwdriver (ref. A fig. 3-01); • spirit level (ref. B fig. 3-01); • tape measure (ref. C fig. 3-01); • plumbing pliers (ref. D fig. 3-01); • pencil (ref. E fig. 3-01); • safety gloves (ref. F fig. 3-01); • drill (ref. G fig. 3-01). B A D C F E G Fig. 3-01 8 Rev 0.
EN INSTALLATION INSTRUCTIONS 3.1 Kit supplied with dishwasher The kit supplied with the dishwasher comprises: • adhesive steam guard (ref. A fig. 3-02); • 1 template for door panel (ref. B fig. 3-02); • 2 aluminium hooks for upper door panel (ref. C Fig. 3-02); • 2 plastic hooks for lower door panel (ref. D Fig. 3-02); • 2 shims (ref. E Fig. 3-02); • 12 screws for securing the upper and lower door panel hooks (ref. F Fig. 3-02); • 2 screws for securing the upper door panels (ref. G Fig.
EN INSTALLATION INSTRUCTIONS 4 DIMENSIONS OF DISHWASHER (SEE FIG. 4-01) Model A (height) B (width) C (depth) STO905 578 mm (22-3/4”) 859 mm (33-13/16”) 550 mm (21-21/32”) Tab. 4-01 A B C Fig. 4-01 10 Rev 0.
EN INSTALLATION INSTRUCTIONS 5 INSTALLATION AND HOOK-UP DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE. Remove the polystyrene rack blocks. Position the appliance in the chosen installation position. The sides and rear of the appliance can lie against kitchen units or walls. If the dishwasher is installed next to a heat source, separate it with a heat insulating panel in order to prevent overheating and malfunctions.
EN INSTALLATION INSTRUCTIONS 5.1 Leveling Before pushing the dishwasher into position, make sure the supporting surface is perfectly level; check with a spirit level (ref. A Fig. 5-01). If necessary, adjust the supporting surface of the dishwasher in order to allow correct operation. After doing this, push in the dishwasher. A Fig. 5-01 12 Rev 0.
EN INSTALLATION INSTRUCTIONS 5.2 Connections Install the dishwasher so as to allow ease of access to the electrical and hydraulic connections through the adjacent unit. These connections must never be behind the dishwasher. The inlet and drain hoses can be pointed in all directions. make sure that they are not bent, crushed or too tight. Tighten the ring nut after pointing the hoses in the required direction.
EN INSTALLATION INSTRUCTIONS A through hole with a diameter of at least 8 cm (5/32”) is required to pass the hoses and power cord (ref. A fig. 5-03). Make sure there area no rough edges that could damage the power cord or hoses. If the dishwasher is installed in a metal unit protect the edge of the through hole for the hoses and power cord with a gasket. Do not use extension cords when making the electrical connection as these do not guarantee safety.
EN INSTALLATION INSTRUCTIONS 5.2.1.1 Connecting to the water tap Connect the inlet hose to a threaded ¾” gas cold water tap, fitting the supplied filter (ref. A fig. 5-04). Firmly secure the hose by tightening the relative ring nut with your hands (ref. B fig. 5-04); finish by tightening another ¼ turn using a pair of plumbing pliers. For models fitted with ACQUASTOP (ref. C fig. 5-04) the filter is already present in the threaded ring nut.
EN INSTALLATION INSTRUCTIONS Do not cut the inlet hose (see fig. 5-05). If the hose is cut, the dishwasher will not work, water will leak and you may be injured. If the hose is too long, wind it up tidily and place it behind the appliance. The cable harness and electrical components must not come into contact with the hydraulic system and the water inlet and drain hoses. Fig. 5-05 When connecting the dishwasher drain hose to the sink make sure that the hose is not bent (ref. A fig.
EN INSTALLATION INSTRUCTIONS 5.2.1.2 Connecting the drain hose Connecting to a drain Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”) (ref. A fig. 5-07); alternatively, place the hose on the sink (ref. B fig. 5-07) using the supplied hose support (see fig. 5-08), but taking care to avoid obstructions or excessive curving. Make sure the hose cannot fall out. For this purpose, the hose support is fitted with a hole (ref. A fig.
EN INSTALLATION INSTRUCTIONS Connecting to a “T” union of the drain circuit MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. 1. Connect the dishwasher drain hose (ref. A fig. 5-09) to the “T” union (ref. B fig. 5-09) of the drain circuit using a 38 to 50 mm (1-1/2 to 2”) screw clamp* (ref. C fig. 5-09); if necessary, cut the end of the dishwasher drain hose (ref. D fig.
EN INSTALLATION INSTRUCTIONS Connecting to a waste disposal unit with an air gap MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. 1. Remove the cover of the waste disposal unit (ref. A fig. 5-10). 2. Connect the dishwasher drain hose (ref. B fig. 5-10) to the air gap (ref. C fig. 5-10) using the wide spring clamp (ref. D fig. 5-10); if necessary, cut the end of the dishwasher drain hose (ref. E fig.
EN INSTALLATION INSTRUCTIONS Connecting to the air gap (no waste disposal unit)) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. 1. Connect the dishwasher drain hose (ref. A fig. 5-11) to the air gap (ref. B fig. 5-11) using the wide spring clamp (ref. C fig. 5-11); if necessary, cut the end of the dishwasher drain hose (ref. D fig. 5-11) (do not cut the corrugated section).
EN INSTALLATION INSTRUCTIONS Connecting to a waste disposal unit (no air gap) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. 1. Remove the cover of the waste disposal unit (ref. A fig. 5-12). 2. Connect the dishwasher drain hose (ref. B fig. 5-12) to the waste disposal unit inlet (ref. C fig. 5-12), using the wide spring clamp (ref. D fig. 5-12). A D C B Fig. 5-12 Rev 0.
EN INSTALLATION INSTRUCTIONS 5.2.2 Electrical connections and warnings CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE. THIS APPLIANCE MUST BE GROUNDED.
EN INSTALLATION INSTRUCTIONS The plug at the end of the power cord and the corresponding socket must be of the same type and must conform to current regulations governing electrical appliances. The plug must be accessible after installation. Never remove the plug by pulling on the wire. If the power cord is damaged, have it replaced by the manufacturer or an authorized service centre.
EN INSTALLATION INSTRUCTIONS Fig. 5-14 Push the dishwasher into position, taking care not to twist or crush the power cord or hoses (see fig. 5-15). TWO PEOPLE WEARING SAFETY GLOVES ARE NEEDED TO PUSH THE DISHWASHER INTO PLACE. Fig. 5-15 24 Rev 0.
EN INSTALLATION INSTRUCTIONS Mount the door panels. Correctly align the panels on a flat surface and place the two 3 mm (0.12”) shims between them (see fig. 5-16). ATTENTION: THE DOOR PANELS MUST NOT EXCEED A CERTAIN WEIGHT AND HEIGHT, OTHERWISE THE DOOR WILL NOT OPEN CORRECTLY. THE UPPER DOOR PANEL MUST WEIGH FROM 2.2 kg TO 7.2 kg (FROM 4.85 TO 15.87 lb) AND HAVE A MINIMUM HEIGHT OF 358 mm (14-3/32”). THE LOWER DOOR PANEL MUST WEIGH FROM 1.5 TO 5 kg (FROM 3.
EN INSTALLATION INSTRUCTIONS The template shows the reference marks (ref. A fig. 5-17) required to indicate any space created between the dishwasher door and the kitchen worktop: this space must be compensated by the upper door panel. Measure this distance and mark it with a pencil on relative reference marks of the template (ref. A fig. 5-17). Then centre the upper panel on the template using the relative reference marks (ref. B fig. 5-11); position it at the height of the reference marks (see ref. A fig.
EN INSTALLATION INSTRUCTIONS Use a suitable screwdriver to secure the four door hooks with the 12 supplied screws (see fig. 5-18) to the marked reference points. The aluminium hooks are for the upper door panel while the plastic ones are for the lower door panel. Fig. 5-18 Drill holes for the panel handle using a drill with a suitable bit. Use the screwdriver to secure the door handle before hooking the panel to the dishwasher (see fig. 5-19). N.B.: the screws are not supplied. Fig. 5-19 Rev 0.
EN INSTALLATION INSTRUCTIONS Attach the upper door panel: fit the hooks into their slots on the dishwasher and allow the panel to slide downwards and slip into place (see fig. 5-20). Fig. 5-20 Take the lower panel and fix the hooks into their the slots on the dishwasher (ref. A fig. 5-21) in the same way as the upper door panel, allowing the panel to slide downwards and slip into place. Do this with the upper door panel slightly open to allow the lower panel to slip in. A Fig. 5-21 28 Rev 0.
EN INSTALLATION INSTRUCTIONS After performing opening and closing tests on the upper door panel, adjust both panels: adjust the upper one by turning the grey screw on the left-hand side of the door (see fig. 5-22); this screw must be adjusted using an appropriate screwdriver. Adjust the lower panel, instead, by turning the orange screw inside the panel at the top (ref. A fig. 5-23); to do this, simply turn it with your hand. Fig. 5-22 A Fig. 5-23 Rev 0.
EN INSTALLATION INSTRUCTIONS Make sure there is a minimum clearance of at least 2.5-3 mm (7/64”-1/8”) (see fig. 5-24) between the upper panel and the lower panel so as to avoid possible friction between the two which would make it difficult to open the dishwasher door. 2.5-3 mm 7/64”-1/8” NO OK Fig. 5-24 After adjusting the door panels, fix them to the dishwasher using a suitable screwdriver and the supplied screws (see fig. 5-25 for the upper panel and 526 for the lower panel). Fig. 5-25 30 Rev 0.
EN INSTALLATION INSTRUCTIONS Fig. 5-26 Before securing the dishwasher to the adjacent units, attach the gaskets to the sides. Remove the adhesive band on the gasket (see fig. 5-27). Fig. 5-27 Rev 0.
EN INSTALLATION INSTRUCTIONS Fix the gasket to the dishwasher, inserting it in the seat on the sides towards the front (see fig. 5-28), and making sure that the long side of the gasket, the one with the hole for inserting the screw, is attached to the outside of the dishwasher; the hole in the long side must match the hole in the dishwasher (see ref. A fig. 5-29). Make sure the gasket adheres perfectly to the dishwasher. Fig. 5-28 A Fig. 5-29 32 Rev 0.
EN INSTALLATION INSTRUCTIONS Fig. 5-30 shows the state of the dishwasher after the above operations are performed. Fig. 5-30 Tighten the supplied screws with a screwdriver (see fig. 5-31); this operation definitively fixes the dishwasher to the adjacent units; cover the side holes using the supplied plugs (see fig. 5-32). Fig. 5-31 Rev 0.
EN INSTALLATION INSTRUCTIONS Fig. 5-32 Adjust the springs on the dishwasher door; use a screwdriver to adjust the tension of the springs on the right- and left-hand sides of the appliance (see fig. 5-33). Fig. 5-33 34 Rev 0.
EN INSTALLATION INSTRUCTIONS ATTENTION: THE SPRINGS OF THE DISHWASHER MUST NEITHER BE TOO TIGHT NOR TO LOW OTHERWISE THE DOOR WILL BE UNBALANCED WHEN OPENING AND BE UNABLE TO REMAIN FULLY OPEN (IF THE SPRING IS TOO TIGHT) OR THE ASSISTED CLOSING SYSTEM WILL NOT OPERATE CORRECTLY (IF THE SPRING IS TOO LOOSE): PERFORM TESTS TO FIND THE RIGHT COMPROMISE. 5.4 Testing After installation, test the dishwasher by starting a work cycle. Check for leaks and make sure the appliance does not malfunction. Rev 0.
1 2 3 4 5 A A 6 7 8 9 10 15 max 26 mm (1 1/32") (14 3/32") min. 3,3 pounds max. 11 pounds (7 1/64" - 14 1/64") min. 1,5 - max. 5 kg min. 358 min. 4,8 - pounds max. 15,5 pounds min. 178 - max. 360 mm min. 2,2 - max.