User`s manual

Page 20
side of the presenter before using it.
Conserve the battery power by switching
the on/off switch to “OFF” position while
traveling. If you will not use the presenter
for a long period of time remove the
batteries from the battery compartment.
When the laser beam becomes dim it may
be due to low battery power. Replace
with 2 fresh batteries to ensure continuous
presentation without power disruption.
The presenter stays connected to your
Bluetooth-enabled computer even when
it’s turned off once it’s set up. If for any
reason the connection to the system is
lost, rst check if the battery power is
low by pressing the laser pointer, then
check if Bluetooth Presenter icon is still
displayed in My Bluetooth Places and
verify that the presenter is within the range
(up to 33 feet) from your computer. If
the connection is lost it can be xed by
following the instructions in the Setting
up Bluetooth Connection section to
•
•
•